Approvals and certificates - Moeller Electric Parts

For Moeller Electric Sales and Support call KMparts.com (866) 595-9616
http://catalog.moeller.net
Moeller HPL0211-2007/2008
Switchgear for North America
Selection and usage of fuses
A1/17
Type 1) constrution 1)
in
Tripping
characteristic
1)
USA Canada kA eff
Switching
capacity
Applications 1)
For use in
H – Fast 10 Primarily domestic USA,
Canada
No. 59 Fast 10 Primarily domestic Canada,USA
“Code”
K K1/K5 – Fast 100 … 200 Protection of circuits for heating, lighting and
feeders and outgoers for mixed loads.
USA
Types H, K and No. 59 “Code”
fit the same bases and are therefore
interchangeable. In the USA,
the K types are therefore being
increasingly replaced by the RK
types.
Rated current: 1 … 600 A
Approvals for world markets
– Slow 100 … 200 Protection of circuits for motors, transformers,
heating and lighting.
USA
J – Fast 200 See item 2 above USA,Canada Compact design. Types J and
HRCI-J fit the same bases, all other
– Slow 200 See item 3 above. USA,Canada fuse types do not fit into these
bases.
HRCI-J Fast 200 See item 2 above USA,Canada
Rated current: 1 … 600 A
Slow 200 See item 3 above. USA,Canada
RK RK1/RK5 – Fast 100 … 200 See item 2 above USA,Canada Types RK1, RK5 and HRCI-R fit the
same bases, all other fuse types do
– Slow 100 … 200 See item 3 above. USA,Canada not fit into these bases.
Rated current: 1 … 600 A
HRCI-R Fast 100 … 200 See item 2 above Canada,USA
Slow 100 … 200 See item 3 above. Canada,USA
HRCII-R Slow – fast 100 … 200 5. Protection of motor circuits Canada All other fuse types do not fit into
bases for HRCII-R.
CC(CD) – Fast 200 See item 2 above USA,Canada Very compact design; all other fuse
Slow 200 See item 3 above. USA,Canada types do not fit into these bases.
Rated current:
CC 1 … 30 A
CD 31 … 60 A
L – Fast 200 See item 2 above USA,Canada “Code” fuses for higher ratings
Slow 200 See item 3 above. USA,Canada Rated current: 601 … 6000 A
Notes 1) The tripping characteristics data and the assigned applications are a rough overview only.
The practice, it is always advisable to find out both this information and the required fusel
type from the North American end customer.