Morsø 1710

More documents

Recommendations

Info

Enjoy your new Morsø stove! Morsø, the biggest stove company in the Danish market, has been making wood-burning stoves of the highest quality since 1853. Just follow the instructions below, and we are certain that you will be able to use and enjoy your new stove for many years to come. 1.0 Installing your Morsø stove 21 1.1 Unpacking the stove 21 1.2 Installing the stove 21 1.3 Chimney sweep 21 1.4 Location of the stove/distance requirements 21 1.5 The chimney 22 1.6 Pipe connections 23 1.7 Connecting to a brick chimney 24 1.8 Connecting to a steel chimney 24 1.9 Draught 25 2.0 Firing/using the stove 26 2.1 Lighting instructions and fuelling intervals 27 3.0 Routine stove maintenance 30 3.1 External maintenance 30 3.2 Internal maintenance 30 3.3 Cleaning the stove 30 Additional accessories We offer a comprehensive line of chimney, floor plate and accessory products that can facilitate the daily operation and maintenance of your Morsø stove. Cast iron Cast iron is a live material. There are no two ovens that are identical. This is partly due to the tolerances of the casting process, partly because the ovens are a work of craftsmanship. 18
1.0 Installing your Morsø stove 1.1 Unpacking the stove We recommend that this job be undertaken by two persons since the stove is heavy for one person to handle. The MORSØ 1710 weighs approx. 120 kg. In order to avoid damage to the stove and the floor, we recommend that you use the cardboard packaging as an underlay. 1.2 Installing the stove National and local regulations regarding the installation of wood-burning stoves must be observed, as must local regulations regarding chimney connections and chimney installation. You may want to ask your chimney sweep for advice. However, you, your technical adviser or tradesman are responsible for ensuring that the installation complies with the applicable national and local regulations. 1.3 Chimney sweep As stated, it may be wise to consult your local chimney sweep before installing the stove. In any event, the chimney sweep must be notified once the wood-burning stove has been installed. The chimney sweep will inspect the installation and schedule sweeping intervals with you. If your chimney has not been used for some time, it should be inspected for cracks, bird’s nests etc., before it is used. 1.4 Location of the stove/distance requirements Distance requirements apply only if the stove is placed against combustible materials. Your new stove can be positioned as specified on the certificate of approval on the back of the stove if the walls are made of combustible material. A layer of wallpaper on a brick wall is normally regarded as non-combustible material. A non-combustible underlay or hearth must cover the flooring at least 30 cm in front of the stove door and at least 15 cm at the sides. Clearances to furniture The normal recommendation is that you should allow a distance of min. 800 mm from the stove to any furniture, but you should also assess whether the furniture or anything else will be affected by its proximity to the stove, e.g. drying out. The distance to combustible material in front of the stove must be min. 800 mm. A wood-burning stove gets extremely hot when in use. Caution must therefore be exercised, particularly with regard to children touching the stove. The handle also heats up during firing, for which reason a special glove is supplied with the stove. The Morsø 1710 complies with the requirements of the EN 13229 standard. The distance from an insulated wall clad with a combustible material must be min. 400 mm from a side wall and 150 mm from the back wall. The walls must be clad with 50 mm noncombustible insulation. If the casing extends all the way up to the ceiling, the ceiling must also be covered with 50 mm thick insulation. The flue outlet must be min. 400 mm from the ceiling. The Norwegian research organisation SINTEF NBL recommends that a non-combustible plate is installed in the casing just above the flue outlet, min. 400 mm from the ceiling. The distance from brick wall must be min. 150 mm to the side and 100 mm back. 19
Page 1 and 2: Morsø 1710 DK UK Opstillings- og b
Page 3 and 4: Opstillings- og betjeningsvejlednin
Page 5 and 6: 1.0 Opstilling af Deres Morsø Ovn
Page 7 and 8: 7. Holder beslag til øverste røgl
Page 9 and 10: Skorsten og røgrør skal forsynes
Page 11 and 12: 2.0 Fyringsteknik/Brugen af Deres o
Page 13 and 14: 5. Normal påfyring bør ske, mens
Page 15 and 16: 3.0 Regelmæssig vedligeholdelse af
Page 17: Instructions for installation and u
Page 21 and 22: 2.7. Holder fittings for the top ba
Page 23 and 24: The chimney must be accessible for
Page 25 and 26: 2.0 Firing/using the stove The amou
Page 27 and 28: 5. You should normally stoke the fi
Page 29 and 30: 3.0 Routine stove maintenance 3.1 E
Page 31 and 32: Spare parts for the 1710 Descriptio

Morsø 1710

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?