MX-B382/SC Operation-Manual Start-Guide GB - Sharp

OPERATION PANEL
16
Numeric keys
These are used to enter the number of
copies, fax numbers, and other
numbers.
[LOGOUT] key ( )
When user authentication is enabled,
press this key to log out after using the
machine. When using the fax function,
this key can be pressed to send tone
signals on a pulse dial line.
[#/P] key ( )
Press this key to use a job program
when using the copier function. When
using the fax function, this key can be
used when dialing.
LOGOUT
[CLEAR ALL] key
Press this key to redo an operation
from the beginning.
All settings will be cleared and
operation will return to the initial state.
[STOP] key
Press this key to stop a copy job or scanning
of an original.
[CLEAR] key
Press this key to return
settings such as the
number of copies to "0".
[POWER SAVE] key
Main power indicator
This indicator lights when the
main power is switched on.
The main power switch is on
the left side of the machine.
[POWER] key
Use this key to turn
the machine power
on and off.
Use this key to activate power save mode.
The [POWER SAVE] key blinks when the
machine is in power save mode. This key is
also used to deactivate power save mode.
[START] key
Use this key to copy or scan an original.
This key is also used to send a fax in fax
mode.