MX-B382/SC Operation-Manual Start-Guide GB - Sharp
MX-B382/SC Operation-Manual Start-Guide GB - Sharp
MX-B382/SC Operation-Manual Start-Guide GB - Sharp
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SUPPLIES<br />
14<br />
* Peripheral device. For more information, see "PERIPHERAL DEVICES" in<br />
"Chapter 1 - BEFORE USING THE MACHINE" in the <strong>Operation</strong> <strong>Guide</strong>.<br />
(15) (16) (17)<br />
(15) Front cover<br />
Open to replace a toner cartridge.<br />
(16) Bypass tray<br />
Special types of paper and<br />
envelopes can be fed from the<br />
bypass tray.<br />
(17) USB connector (B type)<br />
Supports USB 2.0 (Hi-Speed).<br />
A computer can be connected to<br />
this connector to use the machine<br />
as a printer.<br />
SUPPLIES<br />
(1) Toner collection container<br />
This collects excess toner that<br />
remains after printing.<br />
(1) (2)<br />
(19)<br />
(18)<br />
(18) LAN connector<br />
Connect the LAN cable to this<br />
connector when the machine is<br />
used on a network.<br />
(19) USB connector (type A)<br />
This connector is the same as (6).<br />
On the <strong>MX</strong>-<strong>B382</strong>, this connector<br />
is set so that it cannot be used<br />
when shipped from the factory.<br />
To use this connector, please<br />
contact your service<br />
representative.<br />
(2) Toner cartridge<br />
This contains toner for printing.<br />
When the toner runs out in a<br />
cartridge, the cartridge must be<br />
replaced.