LC-42XL2E/S/46XL2E/S/52XL2E/S Operation-Manual GB - Sharp
LC-42XL2E/S/46XL2E/S/52XL2E/S Operation-Manual GB - Sharp
LC-42XL2E/S/46XL2E/S/52XL2E/S Operation-Manual GB - Sharp
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Basic adjustment<br />
Monochrome<br />
For viewing a video in monochrome.<br />
Range of OPC<br />
The brightness level range of the OPC sensor’s<br />
automatic adjustments can be set according to your<br />
preferences. The adjustment range of the OPC sensor<br />
can be set to a maximum of k16 and a minimum of<br />
l16.<br />
Selectable<br />
items<br />
Max. l16 through k16<br />
Min. l16 through k16<br />
Description<br />
NOTE<br />
• This function is available only when the “OPC” setting is set<br />
to “On” or “On: Display”.<br />
• The maximum setting cannot be set to a smaller number<br />
than the minimum setting.<br />
• The minimum setting cannot be set to a bigger number<br />
than the maximum setting.<br />
• The maximum and minimum settings cannot be set to the<br />
same number.<br />
• Depending on the brightness of the surrounding light, the OPC<br />
sensor might not operate if the adjustment range is small.<br />
AV Mode<br />
AV Mode gives you five viewing options to choose from<br />
to best match the system environment, which can vary<br />
due to factors like room-brightness, type of programme<br />
watched or the type of image input from external<br />
equipment.<br />
1<br />
2<br />
Press AV MODE.<br />
Each time you press AV MODE, the mode<br />
changes.<br />
• You can also switch the mode on the “Picture” and<br />
“Audio” menu screen by pressing AV MODE.<br />
Item<br />
STANDARD: For a highly defined image in a normally<br />
bright room.<br />
MOVIE: For viewing a movie in a darkened room.<br />
GAME: For playing of video games.<br />
PC*: For PC.<br />
xvYCC**: Produce realistic colour on the TV screen unlike<br />
any other signal.<br />
USER: Allows the user to customise settings as desired.<br />
You can set the mode for each input source.<br />
DYNAMIC (Fixed): For a clear-cut image emphasising<br />
high contrast for sports viewing. (The Picture and Audio<br />
settings cannot be adjusted.) Each setting value cannot<br />
be changed in this mode.<br />
DYNAMIC: For a clear-cut image emphasising high<br />
contrast for sports viewing.<br />
NOTE<br />
• The item marked with * is available only when selecting<br />
“EXT4”, “EXT5”, “EXT6” or EXT7” from the INPUT SOURCE<br />
menu.<br />
• The item marked with ** is available only when accepting<br />
an xvYCC signal through an HDMI terminal.<br />
Audio Settings<br />
MENU [Audio]<br />
Treble<br />
Bass<br />
Balance<br />
Surround<br />
Reset<br />
You can adjust the sound quality to your preference<br />
with the following settings.<br />
Selectable<br />
items<br />
Audio Power Control<br />
DYNAMIC<br />
Audio<br />
c button d button<br />
Treble For weaker treble For stronger treble<br />
Bass For weaker bass For stronger bass<br />
Balance Decrease audio from<br />
the right speaker<br />
[ 0] –15 +15<br />
[ 0] –15<br />
+15<br />
[ 0] L<br />
R<br />
[Off]<br />
Decrease audio from<br />
the left speaker<br />
This function allows you to enjoy realistic “live” sound.<br />
Power Save Settings<br />
MENU [Power Control]<br />
Power Control Setup<br />
No Signal Off<br />
No <strong>Operation</strong> Off<br />
Ecology<br />
Sleep Timer<br />
Audio adjustment<br />
Audio<br />
Surround<br />
Power Control<br />
No Signal Off<br />
[Disable]<br />
[Disable]<br />
When set to “Enable” the TV will automatically enter the<br />
standby mode if there is no signal input for 15 minutes.<br />
• Five minutes before the TV enters standby mode, the<br />
remaining time displays every minute.<br />
NOTE<br />
• When a TV programme finishes, this function may not<br />
operate.<br />
25