LC-42XL2E/S/46XL2E/S/52XL2E/S Operation-Manual GB - Sharp
LC-42XL2E/S/46XL2E/S/52XL2E/S Operation-Manual GB - Sharp
LC-42XL2E/S/46XL2E/S/52XL2E/S Operation-Manual GB - Sharp
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Connecting external devices<br />
SCART connection<br />
Example of connectable devices<br />
E Decoder<br />
E When using the EXT 1 (SCART) terminal E When using the EXT 2 (SCART) terminal<br />
If your VCR supports TV-VCR advanced AV Link<br />
systems, you can connect the VCR using a fully wired<br />
SCART cable.<br />
SCART cable<br />
Decoder<br />
Controlling devices with SCART using AV Link<br />
Example of connectable devices<br />
E VCR E DVD recorder<br />
SCART cable<br />
VCR<br />
Decoder<br />
SCART cable<br />
NOTE<br />
• In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which<br />
the decoder is connected in “<strong>Manual</strong> adjust” in the “Analogue Setting” menu. (Page 27)<br />
• TV-VCR advanced AV Link systems may not be compatible with some external sources.<br />
• Do not connect the decoder to the EXT2 terminal.<br />
• You cannot connect the VCR with Decoder using a fully wired SCART cable when selecting “Y/C” under the EXT2 in the<br />
“Input Select” menu.<br />
This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual<br />
equipment.<br />
One Touch Play<br />
While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source<br />
(e.g. VCR, DVD).<br />
TV Standby<br />
When the TV enters standby mode, the connected audiovisual equipment (e.g. VCR, DVD) enters standby mode<br />
as well.<br />
WYSIWYR (What You See Is What You Record)<br />
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start<br />
recording by pressing the WYSIWYR button.<br />
Preset Download<br />
Automatically transfers the channel preset information from the tuner on the TV to the one on the connected<br />
audiovisual equipment (e.g. VCR) via the EXT 2 terminal.<br />
NOTE<br />
• Refer to the operation manuals of external equipment the details.<br />
• Only works when the audiovisual equipment is connected to the EXT 2 terminal on the TV with AV Link via a fully wired<br />
SCART.<br />
• The use of the AV Link function is only possible if the TV-set has enforced a complete auto installation with the connected<br />
audiovisual equipment. (Page 9, initial auto installation)<br />
The availability of the AV Link function depends on the audiovisual equipment used. Depending on the manufacturer and type<br />
of equipment used, it is possible that the described functions may be completely or partially unusable.<br />
17