CR1000 Manual - Campbell Scientific

Appendix B. Status Table and Settings
Table 121. Status-Table Fields and Descriptions
Fieldname Description Variable Type Default Range Edit Info Type
CalSeOffSet 19
CalDiffOffset 19
Calibration table of singleended
offset values. Each
integration / range
combination has a singleended
offset associated with
it. These numbers are
updated by the background
slow sequence if needed in
the program.
Calibration table of
differential offset values.
Each integration / range
combination has a
differential offset associated
with it. These numbers are
updated by the background
slow sequence if needed in
the program.
Integer array of 18 close to 0 Calib
Integer array of 18 close to 0 Calib
1 The station name written to the header of data files by the datalogger support software (p. 77) is the
station name entered when the software was set up to communicate with the CR1000. In contrast, the
station name set in the Status table (by typing it directly into the field, using the StationName()
instruction, or using the SetStatus() instruction), can be sampled into a data table using data table
access syntax. See the Program Access to Data Tables (p. 148) section for more information.
2 PakBus Addresses 1 to 4094 are valid. Addresses >= 4000 are generally reserved for a PC by the
datalogger support software (p. 77).
3 Watchdog errors are automatically reset upon compiling a new program.
4 Replace the lithium battery if