CR1000 Manual - Campbell Scientific

Appendix A. CRBasic Programming Instructions
LI7700
Communicates with the LI7700 open path CO 2 and H 2 O sensor.
Syntax
LI7200(Dest, Reps, SDMAddress, Command)
TGA
Measures a TGA100A trace‐gas analyzer system.
Syntax
TGA(Dest, SDMAddress, DataList, ScanMode)
Therm107
Measures a Campbell Scientific 107 thermistor.
Syntax
Therm107(Dest, Reps, SEChan, Vx/ExChan, SettlingTime, Integ,
Mult, Offset)
Therm108
Measures a Campbell Scientific 108 thermistor.
Syntax
Therm108(Dest, Reps, SEChan, Vx/ExChan, SettlingTime, Integ,
Mult, Offset)
Therm109
Measures a Campbell Scientific 109 thermistor.
Syntax
Therm109(Dest, Reps, SEChan, Vx/ExChan, SettlingTime, Integ,
Mult, Offset)
A.5.9.1 Wireless Sensor Network
ArrayIndex
Returns the index of a named element in an array.
Syntax
ArrayIndex(Name)
CWB100
Sets up the CR1000 to request and accept measurements from the CWB100
wireless sensor base.
Syntax
CWB100(ComPort, CWSDest, CWSConfig)
CWB100Diagnostics
Sets up the CR1000 to request and accept measurements from the CWB100
wireless sensor base.
Syntax
CWB100(ComPort, CWSDest, CWSConfig)
CWB100Routes
Returns diagnostic information from a wireless network.
Syntax
CWB100Diagnostics(CWBPort, CWSDiag)
489