CR1000 Manual - Campbell Scientific

Section 11. Glossary
ESS
Environmental Sensor Station
excitation
Application of a precise voltage, usually to a resistive bridge circuit.
execution time
Time required to execute an instruction or group of instructions. If the
execution time of a program exceeds the Scan() Interval, the program is
executed less frequently than programmed.
expression
A series of words, operators, or numbers that produce a value or result.
Glossary. File Control
File Control is a feature of LoggerNet, PC400 and RTDAQ (p. 77)
datalogger support software. It provides a view of the CR1000 file
system and a menu of file management commands:
LNCMD software
Delete facilitates deletion of a specified file
Send facilitates transfer of a file (typically a CRBasic program file) from
PC memory to CR1000 memory.
Retrieve facilitates collection of files viewed in File Control. If
collecting a data file from a CF card with Retrieve, first stop the
CR1000 program or data corruption may result.
Format formats the selected CR1000 memory device. All files,
including data, on the device will be erased.
A feature of LoggerNet Setup Screen. In the Setup Screen network map
(Entire Network), click on a CR1000 datalogger node. The File Retieval
tab should be one of several tabs presented at the right of the screen.
Fill and Stop Memory
A memory configuration for data tables forcing a data table to stop
accepting data when full.
final storage
The portion of CR1000 SRAM Memory allocated for storing data tables
with output arrays. Final Storage is a ring memory, with new data
overwriting the oldest data.
454