CR1000 Manual - Campbell Scientific

Section 4. Quickstart Tutorial
Figure 12: Power and RS-232 connections
4.2.3 PC200W Software Setup
1. Install the PC200W software onto a PC. Follow on-screen prompts during the
installation process. Use the default program and destination folders.
2. Open the PC200W software (figure PC200W Main Window (p. 45) ). When the
software is first run, the EZSetup Wizard will run automatically in a new
window. This will configure the software to communicate with the CR1000.
Table PC200W EZSetup Wizard Example Selections (p. 45) indicates what
information needs to be entered on each screen. Click Next at the bottom of
the screen to advance to the next screen.
See More!
http://www.youtube.com/playlistlist=PL9E364A63D4A3520A&feature=plcp
44