Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Wisotronic dialog 1-Channel Central
Control Unit EWFS ® If you have connected one or several drives via motor control units with local
8.1.2 Drive with motor control
units
operating elements, proceed as follows:
■
Change to the service settings menu as described above. The following
display is shown:
Product
{ }
■
Turn the function dial until the following display appears:
System
settings
{ }
■
Select this menu item (button {). The following display appears:
System
control type
Drive direct
— + | }
■ Change the setting by using the buttons — + until the text Drive
with MCU is displayed and then press the button | (save). If you want
to exit the menu without saving the changes, press the } button twice
consecutively. This completes the process.
TIP
When a comfort function has triggered a move command, a
reference movement DOWN is first carried out. Afterwards
the sun protection is moved to the set position.
932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 95