Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Wisotronic dialog 1-Channel Central
Control Unit EWFS ® In this chapter we will describe the system settings.
8. System settings
8.1 Control type
8.1.1 Drive direct
You can specify to the Wisotronic which type of sun protection system is
connected to its output. This influences the runtime behavior of the control
system.
This setting is recommended if ...
...only one drive is connected directly or
...several drives are connected via motor control units (MCU),
whereby no local operating buttons are connected to the
MCU.
Proceed as follows in order to change the setting:
■ Change to the service settings menu as described above. The following
display is shown:
Product
{ }
■
Turn the function dial until the following display appears:
System
settings
{ }
■
Select this menu item (button {). The following display appears:
System
control type
Drive with MCU
— + | }
■ Change the setting by using the buttons — + until the text Drive
direct is displayed and then press the button | (save). If you want to
exit the menu without saving the changes, press the }button twice
consecutively. This completes the process.
TIP
When a comfort function has triggered a move command, the
sun protection is moved directly to the set position without a
reference movement.
94
We reserve the right to carry out improvements
932806A0•816757•7974k0•08.10.2004