Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

More documents

Recommendations

Info

Wisotronic dialog 1-Channel Central Control Unit EWFS ® You can specify exactly the temperature at which the ice alert is to be triggered. If 7.4.2 Ice monitoring limit "UP" rain falls and the temperature drops below the set limit, the sunblind is moved up and remains in this position until the ice alert has been canceled. For information on how to move the sunblind nevertheless, please refer to Section 6.9.1, "Resetting the ice alert maually". The setting range is from 0 - +9°C. Proceed as follows in order to change the limit: ■ Change to the ice monitoring menu as described above. The following display is shown: Ice monitoring ON — + | } ■ Turn the function dial until the following display appears: Ice limit UP 3° C — + | } ■ Change the settings by using the buttons — + and then press the button | (save) If you want to exit the menu without saving the changes, press the }button twice consecutively. This completes the process. TIP An ice alert can also be de-activated (reset) manually. For further information please refer to Section 6.9.1. 7.4.3 Resetting the ice alert automatically The control system can reset an ice alert automatically. If the outside temperature rises by 2°C above the "UP" limit set by you, the ice alert is reset automatically and the operation is enabled again. If an ice alert is to be reset automatically, proceed as follows: ■ Change to the ice monitoring menu as described above. The following display is shown Ice monitoring ON — + | } 92 We reserve the right to carry out improvements 932806A0•816757•7974k0•08.10.2004
Wisotronic dialog 1-Channel Central Control Unit EWFS ® ■ Turn the function dial until the following display appears: Ice alert automatic reset OFF — + | } ■ Change the setting by using the buttons — + and then press the button | (save). If you want to exit the menu without saving the changes, press the }button twice consecutively. This completes the process. TIP The ON setting means: An ice alert is reset automatically, If the outside temperature rises by 2°C above the "UP" limit set by you. The OFF setting means: An ice alert has to be reset manually as described in Section 6.9.1. 932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 93
Page 1 and 2:
WAREMA Controls Wisotronic dialog 1
Page 3 and 4:
Table of contents 1. General ......
Page 5 and 6:
Table of contents 7. Service settin
Page 7 and 8:
Wisotronic dialog 1-Channel Central
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42: Wisotronic dialog 1-Channel Central
Page 91: Wisotronic dialog 1-Channel Central
Page 103: Wisotronic dialog 1-Channel Central
show all

Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?