Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Wisotronic dialog 1-Channel Central
Control Unit EWFS ® You can specify exactly the temperature at which the ice alert is to be triggered. If
7.4.2 Ice monitoring limit "UP"
rain falls and the temperature drops below the set limit, the sunblind is moved up
and remains in this position until the ice alert has been canceled. For information
on how to move the sunblind nevertheless, please refer to Section 6.9.1,
"Resetting the ice alert maually".
The setting range is from 0 - +9°C. Proceed as follows in order to change the
limit:
■ Change to the ice monitoring menu as described above. The following display
is shown:
Ice
monitoring
ON
— + | }
■
Turn the function dial until the following display appears:
Ice
limit UP
3° C
— + | }
■ Change the settings by using the buttons — + and then press the button |
(save) If you want to exit the menu without saving the changes, press the
}button twice consecutively. This completes the process.
TIP
An ice alert can also be de-activated (reset) manually. For further
information please refer to Section 6.9.1.
7.4.3 Resetting the ice alert
automatically
The control system can reset an ice alert automatically. If the outside temperature
rises by 2°C above the "UP" limit set by you, the ice alert is reset automatically
and the operation is enabled again.
If an ice alert is to be reset automatically, proceed as follows:
■
Change to the ice monitoring menu as described above. The following display
is shown
Ice
monitoring
ON
— + | }
92
We reserve the right to carry out improvements
932806A0•816757•7974k0•08.10.2004