Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

More documents

Recommendations

Info

Wisotronic dialog 1-Channel Central Control Unit EWFS ® First set the turn time. The setting range for the turn time is from 0 to 9.9 seconds. Proceed as follows in order to change the setting: ■ Change to the product settings menu as described above. The following display is shown: Product product type Outside V.blind — + | } ■ Turn the function dial until the following display appears: Product turn time 1.6 seconds — + | } ■ Change the turn time by using the buttons — + and then press the button | (save). If you want to exit the menu without saving the changes, press the }button twice consecutively. This completes the process. 7.2.4 Maximum slat angle Then set the maximum slat angle as specified in the table: ■ Turn the function dial until the following display appears: Product slat angle max. 80° — + | } ■ Change the angle by using the buttons — + and then press the button | (save). If you want to exit the menu without saving the changes, press the }button twice consecutively. This completes the process. 7.2.5 Minimum slat angle Then set the minimum slat angle as specified in the table: ■ Turn the function dial until the following display appears: Product slat angle min. -80° — + | } ■ Change the angle by using the buttons — + and then press the button | (save). If you want to exit the menu without saving the changes, press the }button twice consecutively. This completes the process. 84 We reserve the right to carry out improvements 932806A0•816757•7974k0•08.10.2004
Wisotronic dialog 1-Channel Central Control Unit EWFS ® Subsequently you can use the function "Slat angle", as described in the following sections: ® 6.1.9 (Slat angle after down movement by means of sun control) ® 6.2.4 (Slat angle after down movement by means of dawn/dusk control) ® 6.5.6 (Slat angle after down movement by means of timer switch) ® 6.7.6 (Slat angle after down movement by means of manual operation) After the sunblind has reached its lower end position, a brief turn pulse is sent to the drive motor. This turns, for example, the slats of external venetian blinds or internal venetian blinds open. You can determine this angle yourself and specify it to one degree exactly. 932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 85
Page 1 and 2:
WAREMA Controls Wisotronic dialog 1
Page 3 and 4:
Table of contents 1. General ......
Page 5 and 6:
Table of contents 7. Service settin
Page 7 and 8:
Wisotronic dialog 1-Channel Central
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34: Wisotronic dialog 1-Channel Central
Page 83: Wisotronic dialog 1-Channel Central
Page 103: Wisotronic dialog 1-Channel Central
show all

Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?