Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Wisotronic dialog 1-Channel Central
Control Unit EWFS ®
7.1 Password
You first to have enter the password in order to open the service settings:
■ Turn the function dial until the following display appears:
Service
settings
{
■
Select the menu item (button {). The following display appears:
Enter
password
0000
* + | }
You now have to enter a password (if you have already entered a password, this
menu is no longer displayed. Instead the "Product" menu is displayed
immediately). Enter your password, if you don´t know your password ask your
specialist dealer.
■ Press the button + momentarily until the first number of the password is
displayed at the first position. Change to the next position by pressing the
button * momentarily. Enter all the numbers by the same method and then
press the button {. The following display appears:
Product
{ }
If the incorrect password was entered, 0000 is displayed again and you have
to enter the password again.
■
Select this menu item (button {). The following display appears:
Product
Product type
Conserv. awning
— + | }
You can now call up the individual menus with the function dial.
TIP
After you have carried out your settings and have completed
them, de-energize the device for approx. 5 seconds and then
switch it on again. This blocks the access to the service
settings again so that they can only be opened again by
entering the password. This ensures that unauthorized
persons do not have access to the service settings!
932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 75