Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Wisotronic</strong> <strong>dialog</strong> 1-<strong>Channel</strong> <strong>Central</strong><br />
<strong>Control</strong> <strong>Unit</strong> <strong>EWFS</strong> ® ■ Press the button +. The text<br />
CAUTION! is displayed. You now have to press the button + as often<br />
as is required to have read the following text completely: CAUTION!<br />
Resetting the ice alert enables the control<br />
of the channel. Movement commands<br />
could destroy frozen products. The user<br />
is responsible for damage to frozen<br />
products. RESET Yes<br />
Ice alert<br />
man. reset<br />
YES<br />
— + | }<br />
■<br />
Now press the button |(save). The ice alert has now been reset. The text<br />
Ice alert enable is displayed and the sunblind can be operated<br />
again. Then press the } button twice successively. This completes the<br />
process.<br />
CAUTION<br />
The ice alert now remains reset until the conditions for an ice<br />
alert exist again: If the external temperature drops below the<br />
set limit AND rain falls, the ice alert is activated again.<br />
We therefore recommend that you enable the ice alert in due<br />
course, in particular if your sunblind is not observed<br />
constantly (for example in your absence).<br />
6.9.2 Enabling the ice alert<br />
again<br />
An ice alert is saved in the <strong>Wisotronic</strong> for the duration of the ice condition. An<br />
example: Because the external temperature dropped below the freezing point<br />
during the night and freezing rain fell briefly afterwards, the ice alert is triggered,<br />
the sunblind is moved up and operation blocked. When you wanted to operate<br />
your sunblind the next morning, you found the ice alert. Because you wanted to<br />
operate the sunblind nevertheless, you reset the ice alert and have, for example,<br />
moved your external venetian blinds down. In the evening you want to enable the<br />
ice alert again, because the frost still exists. Because the ice condition continues<br />
to exist, the sunblind moves up again immediately after the ice alert has been<br />
enabled!<br />
CAUTION<br />
Therefore first ensure that your sun protection cannot be<br />
damaged by the movement: External venetian blinds and<br />
roller shutters, cassette awnings and conservatory awnings<br />
can be frozen tight in their guide rails. If the ice alert is<br />
enabled nevertheless while frost continues, damage to<br />
property may result! If the sunblind is operated during icing,<br />
all guarantees and liabilities expire!<br />
932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 67
Change language