Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Wisotronic dialog 1-Channel Central
Control Unit EWFS ® ■ Select the menu item (button {). The following display appears:
Remote control
memory
1:ID 09747 C1
— + | }
■
Turn the function dial until the following display appears:
Remote control
learn
1:ID 09747 C1
— + | }
■
Select the memory to be learned (1 to 16) by using the buttons — +. Select
the desired channel on your remote control and then press the „L“ button on
your remote control. As soon as the display of the Wisotronic has changed,
the remote control has been recognized and the learned channel is displayed.
Now press the button | (save). The remote control has been stored and the
Wisotronic can now be operated with it. This completes the process.
TIP
If, as is shown in this example, a remote control is already
displayed in the display, this is overwritten during saving. You
can teach up to 16 different remote controls to different
places, if required.
932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 63