Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Wisotronic dialog 1-Channel Central
Control Unit EWFS ®
■
Turn the function dial until the following display appears:
Remote control
learn
1:ID 09747 C1
— + | }
■
Select the memory to be learned (1 to 16) by using the buttons — + and then
press the button „L“ on your remote control. The remote control has been
recognized as soon as the Wisotronic display changes. Now press the button |
(save). The remote control has been stored and the Wisotronic can now be
operated with it. This completes the process.
TIP
If, as is shown in this example, a remote control is already
displayed in the display, this is overwritten during saving. You
can learn up to 16 different remote controls to different
places, if required.
6.8.3 Building a group
A particular feature is the 8-channel remote control. You have to imagine that each
individual channel can be viewed as a separate remote control. If you learn an 8-
channel remote control for the Wisotronic, you must first select the channel
which you want to learn at the remote control. This recognizes the Wisotronic
automatically. You can assign up to 16 remote controls to the Wisotronic. If you
have several Wisotronic dialog units, you can, for example form groups:
Channel 1 operates Wisotronic 1
Channel 2 operates Wisotronic 2
Channel 3 operates Wisotronic 4
Channel 4 operates Wisotronic 1, 2, 3 and 4 together
■
Turn the function dial until the following display appears:
User
settings
{
■
Select the menu item (button {). The following display appears:
Sun
control
{ }
■
Turn the function dial until the following display appears:
Remote control
learn/delete
{ }
62
We reserve the right to carry out improvements
932806A0•816757•7974k0•08.10.2004