Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

More documents

Recommendations

Info

Wisotronic dialog 1-Channel Central 6.7 Manual operation Control Unit EWFS ® In this section you learn how your sun protection can be operated manually. Different sun protection products also require different control behaviors. For example, it makes sense at external venetian blinds to be able to adjust the slat angle by means of a short move command, whereas this does not make much sense at awnings or roller shutters. Depending on the sun protection product which is to be controlled, you can choose between the following control modes: ® Dead man’s mode ® Time mode ® Permanent mode ® Continuous mode 6.7.1 "Dead man’s mode" 6.7.2 "Time mode" 6.7.3 "Permanent mode" 6.7.4 "Continuous mode" In this setting the sunblind moves in the desired direction until the button is released again. This control mode is particularly suitable for slat products such as external venetian blinds or internal venetian blinds: The sunblind moves in the corresponding direction after the button has been pressed. If the button is pressed for longer than 2.5 seconds, the control system remains locked. The button can then be released. The sun protection moves until the set runtime has expired. In order to de-activate the lock mode and stop the motor, the button with the opposite move command has to be pressed briefly. The slats are turned up after the "DOWN" runtime has expired. If you only want to turn the slats, just press one of the buttons briefly. If you want the slats to remain closed after moving down, press the "Down" button once more during the "DOWN" runtime. The sunblind moves until the end of the runtime - the slats do not turn up. This control mode is suitable for, for example, roller shutters and cloth products. The runtime starts immediately after the "Up" button has been pressed. The sunblind is moved up. If the "Down" button is pressed during the up movement, the drive stops. The adjustable runtime is started immediately after the "Down" button has been pressed. The sun protection is moved down. If the "Up" button is pressed during the down movement, the drive stops. This control mode is particularly suitable for lighting equipment: Brief pressing of the "Up" button - the connected device is switched on and the runtime is set to "endless". Brief pressing of the "Down" button - the device is switched off again. TIP The set control mode also operates with the remote control. The movement can also be stopped by pressing the function dial. 56 We reserve the right to carry out improvements 932806A0•816757•7974k0•08.10.2004
Wisotronic dialog 1-Channel Central Control Unit EWFS ® If you have set the connected sunblind correctly (as described in Section 8.2), 6.7.5 Changing the control mode advisable setting values have already been set for each of these products, for example: ® For slat products "Time mode" ® For cloth products and roller shutters "Permanent mode" We recommend that you do not change these values. If you nevertheless want to carry out changes because, for example, you have connected other devices (e.g. windows, facade awnings) to the Wisotronic, proceed as follows: ■ Turn the function dial until the following display appears: User settings { ■ Select the menu item (button {). The following display appears: Sun control { } ■ Turn the function dial until the following display appears: Manual operation { } ■ Select this menu item (button {). The following display appears: Manual operation Time mode — + | } ■ Change the mode by using the buttons — + and then press the button | (save). If you want to exit the menu without saving the changes, press the }button twice consecutively. This completes the process. 932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 57
Page 1 and 2:
WAREMA Controls Wisotronic dialog 1
Page 3 and 4:
Table of contents 1. General ......
Page 5 and 6: Table of contents 7. Service settin
Page 7 and 8: Wisotronic dialog 1-Channel Central
Page 55: Wisotronic dialog 1-Channel Central
Page 103: Wisotronic dialog 1-Channel Central
show all

Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Create successful ePaper yourself

Delete template?

Save as template?