Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Wisotronic dialog 1-Channel Central
Control Unit EWFS ®
6.2.2 Dawn/dusk control limit
"UP"
The limit "UP" specifies the brightness from which the sunblind is to be moved up
in the morning. The setting range is from 0 - 99 lx. If you do not want to evaluate
the limit "UP", you can also set the value "0" (---) here. Proceed as follows in
order to change the setting value:
■ Change to the dawn/dusk control menu as described above. Turn the function
dial until the following display appears:
Dawn
limit UP
30 lx
— + | }
■ Change the setting values by using the buttons — + and then press the
button |(save). If you want to exit the menu without saving the changes,
press the } button twice consecutively. This completes the process.
6.2.3 Dawn/dusk control limit
"DOWN"
The limit "DOWN" specifies the brightness from which the sunblind is to be
moved down in the evening. The setting range is from 0 - 99 lx. If you do not
want to evaluate the limit "DOWN", you can also set the value "0" (---) here.
Proceed as follows in order to change the setting value:
■ Change to the dawn/dusk control menu as described above. Turn the function
dial until the following display appears:
Dusk
limit DOWN
80 lx
— + | }
■ Change the setting values by using the buttons — + and then press the
button |(save). If you want to exit the menu without saving the changes,
press the } button twice consecutively. This completes the process.
TIP
If the sun control is used in combination with the dawn/dusk
control, you have to set the "Sun delay UP" and the "Sun
delay OPEN" periods of the sun control to longer than 5
minutes, because the delay periods of the dawn/dusk control
are fixed internally at 5 minutes. Otherwise the Dawn/dusk
control does not work properly.
932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 33