Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

More documents

Recommendations

Info

Wisotronic dialog 1-Channel Central Control Unit EWFS ® Here you can specify whether the dawn/dusk control is to be activated or not. 6.2.1 Dawn/dusk control ON/OFF Proceed as follows in order to change the setting value: ■ Turn the function dial until the following display appears: User settings { ■ Select the menu item (button {). The following display appears: Sun control { } ■ Turn the function dial until the following display appears: Dawn/Dusk control { } ■ Select this menu item (button {). The following display appears: Dawn/Dusk control ON — + | } ■ Activate or de-activate the dawn/dusk control by using the buttons — + and then press the button | (save). If you want to exit the menu without saving the changes, press the } button twice consecutively. This completes the process. 32 We reserve the right to carry out improvements 932806A0•816757•7974k0•08.10.2004
Wisotronic dialog 1-Channel Central Control Unit EWFS ® 6.2.2 Dawn/dusk control limit "UP" The limit "UP" specifies the brightness from which the sunblind is to be moved up in the morning. The setting range is from 0 - 99 lx. If you do not want to evaluate the limit "UP", you can also set the value "0" (---) here. Proceed as follows in order to change the setting value: ■ Change to the dawn/dusk control menu as described above. Turn the function dial until the following display appears: Dawn limit UP 30 lx — + | } ■ Change the setting values by using the buttons — + and then press the button |(save). If you want to exit the menu without saving the changes, press the } button twice consecutively. This completes the process. 6.2.3 Dawn/dusk control limit "DOWN" The limit "DOWN" specifies the brightness from which the sunblind is to be moved down in the evening. The setting range is from 0 - 99 lx. If you do not want to evaluate the limit "DOWN", you can also set the value "0" (---) here. Proceed as follows in order to change the setting value: ■ Change to the dawn/dusk control menu as described above. Turn the function dial until the following display appears: Dusk limit DOWN 80 lx — + | } ■ Change the setting values by using the buttons — + and then press the button |(save). If you want to exit the menu without saving the changes, press the } button twice consecutively. This completes the process. TIP If the sun control is used in combination with the dawn/dusk control, you have to set the "Sun delay UP" and the "Sun delay OPEN" periods of the sun control to longer than 5 minutes, because the delay periods of the dawn/dusk control are fixed internally at 5 minutes. Otherwise the Dawn/dusk control does not work properly. 932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 33
Page 1 and 2: WAREMA Controls Wisotronic dialog 1
Page 3 and 4: Table of contents 1. General ......
Page 5 and 6: Table of contents 7. Service settin
Page 7 and 8: Wisotronic dialog 1-Channel Central
Page 31: Wisotronic dialog 1-Channel Central
Page 83 and 84:
Wisotronic dialog 1-Channel Central
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103:
show all

Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Create successful ePaper yourself

Delete template?

Save as template?