Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Wisotronic</strong> <strong>dialog</strong> 1-<strong>Channel</strong> <strong>Central</strong><br />
<strong>Control</strong> <strong>Unit</strong> <strong>EWFS</strong> ® The limit "UP" specifies the intensity of brightness at which the sunblind is to be<br />
6.1.5 Sun control limit "UP"<br />
moved up. The setting range is from 0 - 99 klx. If you do not want to evaluate the<br />
limit "UP", you can also set the value "0" (---) here. Proceed as follows in order<br />
to change the setting value:<br />
■ Change to the sun control menu as described above. Turn the function dial<br />
until the following display appears:<br />
Sun<br />
limit UP<br />
15 klx<br />
— + | }<br />
■ Change the setting values by using the buttons — + and then press the<br />
button | (save). If you want to exit the menu without saving the changes,<br />
press the } button twice consecutively. This completes the process.<br />
6.1.6 Sun control delay "UP"<br />
A delay can be assigned to the limit "UP" so that the sun protection does not<br />
move up immediately whenever the brightness changes (for example when the<br />
sun is covered temporarily by a cloud). This smoothens the move behavior of the<br />
sun protection and thus increases the comfort. If the limits are reached or<br />
exceeded for the duration of this delay period, the "UP" command is triggered and<br />
the sun protection is moved up. The setting range is from 0 - 99 minutes. Proceed<br />
as follows in order to change the setting value:<br />
■ Change to the sun control menu as described above. Turn the function dial<br />
until the following display appears:<br />
Sun<br />
delay UP<br />
20 minutes<br />
— + | }<br />
■ Change the setting values by using the buttons — + and then press the<br />
button | (save). If you want to exit the menu without saving the changes,<br />
press the } button twice consecutively. This completes the process.<br />
TIP<br />
If the sun control is used in combination with the dawn/dusk<br />
control, you have to set the "Sun delay UP" and the "Sun<br />
delay OPEN" periods of the sun control to longer than 5<br />
minutes, because the delay periods of the dawn/dusk control<br />
are fixed internally at 5 minutes. Otherwise the Dawn/dusk<br />
control does not work properly.<br />
932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 27