Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema

Wisotronic dialog 1-Channel Central
Control Unit EWFS ® The default menu is displayed automatically after the power is applied to the
5. Getting started
5.1 Display level and manual
operation
Wisotronic or if no operation has been carried out for a duration of three minutes.
You can access the following menus by turning the function dial.
The following menus can be called up:
Display of the current room temperature
or cause/manual operation
3.2.1
Display of the
cause/manual operation
3.2.2
Initial menu
User settings
{
Bypass into
6
the manu
"User settings"
Initial menu
Service settings
{
Bypass into
7
the manu
"Service settings"
Main menu
Display current state of
Wind monitoring
Sun control
Dawn/Dusk control
Display current state of
Ice monitoring
Rain monitoring
Temperature control
3.2.6
3.2.7
Display current state of
Timer switch
Comfort timer
3.2.8
Display measured values of
Temp int
Temp ext
Windspeed
3.2.9
Display measured values of
Brightness
Rain
3.2.10
Display of
Date
Time
3.2.11
Fig. 5-1:
Main menu level: The section numbers are listed on the right in the boxes.
Important information!
TIP
The displays shown in these instructions are examples. The
displayed entries which can be modified may therefore differ
from those on the display of your Wisotronic.
932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 19