Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema Wisotronic dialog 1-Channel Central Control Unit EWFS - Warema
Wisotronic dialog 1-Channel Central Control Unit EWFS ® The supplied radio remote control allows the Wisotronic to be controlled remotely. 3.2.3 Operating with the remote control First read the user instructions of your remote control in order to familiarize yourself with all the functions. If the control system nevertheless does not react to the remote control, please refer to Section 6.8 "Learning/Deleting the Remote Control". Never press the buttons on your remote control if you cannot see the sunblind! ATTENTION 3.2.4 Initial menu "User settings" The next menu is accessed by turning the dial clockwise: User settings { From this menu you can branch to the "User settings" submenu by pressing the { button. 3.2.5 Initial menu "Service settings" The next menu is accessed by turning the dial clockwise: Service settings { From this menu you can branch to the "Service settings" submenu by pressing the { button. 3.2.6 Displaying current state of Wind monitoring, Sun, Dawn/Dusk control The next display is accessed by turning the dial clockwise: Functions Wind ON Sun ON Dawn/Dusk ON Here information is provided about the current status of the comfort- and safety functions “wind monitoring”, “sun control” and “dawn/dusk control”. The righthand side shows whether the respective function is activated or de-activated. 3.2.7 Displaying current state of Ice, Rain monitoring, Temp. control The next display is accessed by turning the dial clockwise: Functions Ice OFF Rain ON Temperature ON Here information is provided about the current status of the comfort- and safety functions „ice monitoring“, „rain monitoring“ and „temperature control“. The right-hand side shows whether the respective function is activated or deactivated. 12 We reserve the right to carry out improvements 932806A0•816757•7974k0•08.10.2004
Wisotronic dialog 1-Channel Central Control Unit EWFS ® The next display is accessed by turning the dial clockwise: 3.2.8 Displaying current state of Timer switch and Comfort timer Functions Timer sw. OFF Comf. timer ON Here information is provided about the current status of the timer switch and the comfort timer. The right-hand side shows whether the respective function is activated or de-activated. 3.2.9 Displaying measured values of int/ext Temperature and Windspeed The next display is accessed by turning the dial clockwise: Measured values Temp int 25° C Temp ext 23° C Wind 2m/s Here information is provided about the current measured data of the “internal” and “external” temperature senor and the wind speed (the corresponding sensors have to be connected for this function). 3.2.10 Displaying measured values of brightness and rain The next display is accessed by turning the dial clockwise: Measured values Photo 10klx Rain NO Here information is provided about the current measured data for outdoor brightness and whether it is currently raining/snowing or not (the corresponding sensors have to be connected for this function). 3.2.11 Displaying the date and time The next display is accessed by turning the dial clockwise: Wisotronic dialog 1CH Mo 04.01.2004 09:10:38 The current date and time are displayed in this menu. if the unit is not operated for a period of three minutes, this screen is displayed automatically: X H Temperature 23° C T TIP Familiarize yourself with these basic functions, turn the function dial and watch how the display changes whenever the function dial is turned. 932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 13
- Page 1 and 2: WAREMA Controls Wisotronic dialog 1
- Page 3 and 4: Table of contents 1. General ......
- Page 5 and 6: Table of contents 7. Service settin
- Page 7 and 8: Wisotronic dialog 1-Channel Central
- Page 9 and 10: Wisotronic dialog 1-Channel Central
- Page 11: Wisotronic dialog 1-Channel Central
- Page 15 and 16: Wisotronic dialog 1-Channel Central
- Page 17 and 18: Wisotronic dialog 1-Channel Central
- Page 19 and 20: Wisotronic dialog 1-Channel Central
- Page 21 and 22: Wisotronic dialog 1-Channel Central
- Page 23 and 24: Wisotronic dialog 1-Channel Central
- Page 25 and 26: Wisotronic dialog 1-Channel Central
- Page 27 and 28: Wisotronic dialog 1-Channel Central
- Page 29 and 30: Wisotronic dialog 1-Channel Central
- Page 31 and 32: Wisotronic dialog 1-Channel Central
- Page 33 and 34: Wisotronic dialog 1-Channel Central
- Page 35 and 36: Wisotronic dialog 1-Channel Central
- Page 37 and 38: Wisotronic dialog 1-Channel Central
- Page 39 and 40: Wisotronic dialog 1-Channel Central
- Page 41 and 42: Wisotronic dialog 1-Channel Central
- Page 43 and 44: Wisotronic dialog 1-Channel Central
- Page 45 and 46: Wisotronic dialog 1-Channel Central
- Page 47 and 48: Wisotronic dialog 1-Channel Central
- Page 49 and 50: Wisotronic dialog 1-Channel Central
- Page 51 and 52: Wisotronic dialog 1-Channel Central
- Page 53 and 54: Wisotronic dialog 1-Channel Central
- Page 55 and 56: Wisotronic dialog 1-Channel Central
- Page 57 and 58: Wisotronic dialog 1-Channel Central
- Page 59 and 60: Wisotronic dialog 1-Channel Central
- Page 61 and 62: Wisotronic dialog 1-Channel Central
<strong>Wisotronic</strong> <strong>dialog</strong> 1-<strong>Channel</strong> <strong>Central</strong><br />
<strong>Control</strong> <strong>Unit</strong> <strong>EWFS</strong> ® The next display is accessed by turning the dial clockwise:<br />
3.2.8 Displaying current state of<br />
Timer switch and Comfort<br />
timer<br />
Functions<br />
Timer sw. OFF<br />
Comf. timer ON<br />
Here information is provided about the current status of the timer switch and the<br />
comfort timer. The right-hand side shows whether the respective function is<br />
activated or de-activated.<br />
3.2.9 Displaying measured<br />
values of int/ext<br />
Temperature and Windspeed<br />
The next display is accessed by turning the dial clockwise:<br />
Measured values<br />
Temp int 25° C<br />
Temp ext 23° C<br />
Wind<br />
2m/s<br />
Here information is provided about the current measured data of the “internal”<br />
and “external” temperature senor and the wind speed (the corresponding<br />
sensors have to be connected for this function).<br />
3.2.10 Displaying measured<br />
values of brightness and<br />
rain<br />
The next display is accessed by turning the dial clockwise:<br />
Measured values<br />
Photo<br />
10klx<br />
Rain<br />
NO<br />
Here information is provided about the current measured data for outdoor<br />
brightness and whether it is currently raining/snowing or not (the corresponding<br />
sensors have to be connected for this function).<br />
3.2.11 Displaying the date and<br />
time<br />
The next display is accessed by turning the dial clockwise:<br />
<strong>Wisotronic</strong><br />
<strong>dialog</strong> 1CH<br />
Mo 04.01.2004<br />
09:10:38<br />
The current date and time are displayed in this menu. if the unit is not operated<br />
for a period of three minutes, this screen is displayed automatically:<br />
X<br />
H<br />
Temperature<br />
23° C<br />
T<br />
TIP<br />
Familiarize yourself with these basic functions, turn the<br />
function dial and watch how the display changes whenever<br />
the function dial is turned.<br />
932806A0•816757•7974k0•08.10.2004 We reserve the right to carry out improvements 13