Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Residential<br />
A. O. <strong>Smith</strong><br />
makes an<br />
important<br />
decision easy!<br />
Choosing the right water heater isn't as simple as<br />
“one size fits all.” The size of the family, the size<br />
of the bathtub, and the size of the budget are<br />
just three factors to consider. A. O. <strong>Smith</strong> has<br />
taken all of these factors into account and offers an<br />
innovative selection of gas and electric residential<br />
water heaters that provide clear choices to make<br />
the right selection for every home.<br />
The very best and most efficient water heater<br />
money can buy is the Conservationist ® . For large<br />
families or homes with high hot water demand,<br />
ProMax ® High Recovery delivers maximum hot<br />
water. If utility rebates can reduce cost, ProMax ®<br />
High Efficiency is the right choice. Regardless of<br />
the model, you can be sure it’s built on a solid<br />
foundation of quality and innovation that’s made<br />
A. O. <strong>Smith</strong> water heaters the preferred brand of<br />
the professional plumbing contractor.<br />
2<br />
All A. O. <strong>Smith</strong> residential water heaters meet or exceed federal minimum efficiency standards effective January 20, 2004,<br />
according to the National Appliance Energy Conservation Act (NAECA). They also comply with the latest editions of the<br />
B.O.C.A. National Codes, C.E.C., U.B.C., S.B.C.C., C.A.B.O. and the HUD Standards Gas models meet American National<br />
Standards Institute standards (ANS Z21.10.1) governing storage type water heaters. Electric models are UL listed according<br />
to safety specifications outlined in Underwriters Laboratories, Inc. Standards for Safety (U.L. 174).
WATER HEATERS<br />
Blue Diamond<br />
Glass Coating<br />
Our Conservationist ® gas and electric water<br />
heaters now have the ultimate protection<br />
against rust and corrosion for the longest tank<br />
life. A. O. <strong>Smith</strong>’s Blue Diamond glass<br />
coating provides over twice the corrosion<br />
resistance compared to industry-standard<br />
glass lining.<br />
CoreGard – Advanced Anode<br />
Rod Protection…Now An<br />
Industry Standard!<br />
The anode rod is a highly effective corrosion fighting<br />
system which utilizes cathodic action to protect<br />
internal tank surfaces from corrosive elements.<br />
CoreGard adds a stainless steel core to magnesium<br />
or aluminum anodes for even longer life. Standard<br />
on Conservationist and ProMax models.<br />
DynaClean Automatic<br />
Sediment-Cleaning System<br />
Automatic self-cleaning action<br />
greatly reduces sediment accumulation<br />
and maximizes hot water output.<br />
Conservationist models are equipped with<br />
advanced DynaClean II, for maximum<br />
sediment-fighting power. ProMax ® models<br />
feature standard DynaClean design.<br />
Tamper-Resistant<br />
Brass Drain Valve<br />
Reliable, quality brass drain valve<br />
with “screw-slot” head to help<br />
prevent valve opening by curious<br />
youngsters. Standard on most other<br />
residential gas and electric models.<br />
PEX Dip Tubes<br />
A. O. <strong>Smith</strong>’s PEX cross-link polymer<br />
dip tubes are long-lasting with<br />
superior resistance to destructive<br />
thermal oxidation. Standard on all<br />
gas and electric models.<br />
T&P Relief Valve<br />
Every temperature and pressure<br />
relief valve is factory-supplied and<br />
matched to the heater to help ensure<br />
that every A. O. <strong>Smith</strong> residential<br />
water heater is installed properly.<br />
Intelli-Vent Power<br />
Gas Control Valve<br />
Now standard on A. O. <strong>Smith</strong> power-vent<br />
and power direct-vent models, this advanced<br />
electronic valve features polarity sensing to ensure<br />
proper operation, simplified diagnostics and a<br />
nearly indestructible silicon nitride hot surface<br />
igniter.<br />
Green Choice<br />
Low-NOx Burner<br />
Patented “eco-friendly” burner design reduces<br />
NOx emissions by up to 33% and complies<br />
with Southern California and Texas<br />
requirements. Standard on all gas models.<br />
Innovative A. O. <strong>Smith</strong><br />
C3 Technology <strong>Water</strong> <strong>Heaters</strong><br />
A. O. <strong>Smith</strong> 30-, 40- and 50-gallon standard atmospheric gas<br />
and 40- and 50-gallon Power-Vent gas water heater models now<br />
incorporate C3 Technology . They meet new ANS Z21.10.1<br />
“Flammable Vapor Ignition Resistant” standards associated with<br />
the accidental ignition of flammable vapors outside the water<br />
heater. With A. O. <strong>Smith</strong>’s non-metallic Corderite Flame Arrestor,<br />
C3 Technology provides an advanced level of protection and the<br />
industry’s most contractor-friendly design.<br />
3
Residential<br />
<strong>Water</strong> Heater<br />
Selection Guide<br />
To select the right A. O. <strong>Smith</strong> water heater for your home, you need to consider the size of your family<br />
and other factors that contribute to your First Hour Rating Requirement. The chart below provides suggested<br />
A. O. <strong>Smith</strong> Residential <strong>Water</strong> Heater selection guidelines for several family sizes.<br />
To Choose the Right <strong>Water</strong> Heater for You…<br />
1. Determine whether your family is Low Demand or High Demand. You should consider your<br />
family to be High Demand if...<br />
• There are more than two full baths in the home.<br />
• There are (or will be) teenagers living in the home. It’s a fact: teenagers use more hot water<br />
for showering and washing clothes.<br />
• If you have an oversize whirlpool bath or other large tub. As a rule of thumb, the water<br />
heater tank capacity should be 100% of the bathtub capacity (example: 75-gallon tub/<br />
75-gallon water heater).<br />
2. Find your Family Size and Demand Profile in the chart below, and read across to find the First Hour Rating<br />
Requirement for your family. If you decide your family is High Demand, consider moving up to the next First<br />
Hour Rating level.<br />
3. Consult the charts on the following pages for an A. O. <strong>Smith</strong> residential water heater with a First Hour Rating<br />
that meets your requirement.<br />
FAMILY SIZE<br />
FIRST HOUR RATING REQUIREMENT<br />
2 People 45 – 55 Gallons<br />
3 People 55 – 65 Gallons<br />
4 People 65 – 75 Gallons<br />
5 People 75 – 85 Gallons<br />
6 People 85 – 100 Gallons<br />
7 or More People 100 or More Gallons<br />
Remember, these are general recommendations...your A. O. <strong>Smith</strong> <strong>Water</strong> Heater Specialist can review your family’s needs in even greater detail<br />
to make sure the model you choose will always provide enough hot water to meet the demand.<br />
4
Residential<br />
Gas<br />
Standard Vent<br />
GAS WATER HEATERS<br />
Conservationist ®<br />
The Conservationist, our top-of-the-line model, is fully loaded with all of A. O. <strong>Smith</strong>’s leading<br />
innovations. For consumers looking for maximum energy savings and excellent output, the<br />
Conservationist is the model of choice.<br />
• Highest energy factors – 2˝-thick CFC-free foam insulation, with external traps,<br />
specially designed “high draw” combustion chamber<br />
• DynaClean II automatic sediment-cleaning system – creates turbulence in tank for<br />
maximum protection against lime and sediment buildup<br />
• Blue Diamond Glass Coating – A. O. <strong>Smith</strong> innovation delivers over twice the corrosion<br />
resistance compared to industry-standard glass lining<br />
• C3 Technology “Flammable Vapor Ignition Resistant” System<br />
• 40,000 BTU input on all models – delivers high first hour ratings and recoveries<br />
• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes<br />
• Heat trap nipples reduce heat loss through outlet and inlet water connections (3/4˝ male)<br />
• Our best CoreGard magnesium anode rod with stainless steel core provides added<br />
protection against tank corrosion<br />
• Piezo igniter for easy “no-match” pilot ignition<br />
• Eco-friendly Green Choice gas burner reduces NOx emissions by 33% compared to<br />
standard burners<br />
• Factory-installed temperature and pressure (T&P) relief valve<br />
• Tamper-resistant brass drain valve<br />
• Extra warranty protection – 10 years on the tank and parts<br />
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD<br />
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET<br />
TALL MODELS<br />
XGV-40 81 .63 40 40,000 41 63-1/2 20-1/2 3 or 4<br />
XGV-50 97 .63 50 40,000 44 65 22 3 or 4<br />
SHORT MODELS<br />
XGVL-40 79 .63 40 40,000 43 56 22 3 or 4<br />
*Height to top of draft hood.<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.<br />
5
Residential<br />
Gas<br />
ProMax ® Plus High Recovery<br />
The ProMax Plus High Recovery is A. O. <strong>Smith</strong>’s “big family” gas line with larger sizes and higher<br />
inputs than any other. They are ideal for homes with teens or other high-demand factors.<br />
• Highest recoveries and first hour ratings – capacity/input combinations up<br />
to 98 gallons/75,100 BTU produce recoveries up to 81 gallons per hour,<br />
with deliverable hot water up to 150 gallons in the first hour<br />
• C3 Technology “Flammable Vapor Ignition Resistant” System<br />
• DynaClean diffuser dip tube – reduces lime and sediment buildup<br />
• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes<br />
• Eco-friendly Green Choice gas burner reduces NOx emissions by 33% compared<br />
to standard burners<br />
• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition<br />
• CoreGard aluminum anode rod with stainless steel core provides added<br />
protection against tank corrosion<br />
• Factory-installed temperature and pressure (T&P) relief valve<br />
• Tamper-resistant brass drain valve<br />
• 6-year warranty on tank and parts<br />
• 8-year extended warranty available on 30-, 40- and 50-gallon models<br />
• 10-year tank warranty available on all models<br />
ProMax ® Plus High Efficiency<br />
The ProMax Plus High Efficiency is a great combination of value and savings, meeting energy<br />
efficiency requirements for most gas utility rebate programs.<br />
• High Energy Factors qualify for most gas utility rebate programs, Energy Star Home<br />
Program recommendations and California Title 24 requirements<br />
• C3 Technology “Flammable Vapor Ignition Resistant” System<br />
• 2˝-thick foam insulation<br />
• Energy-saving external heat traps<br />
• DynaClean diffuser dip tube – reduces lime and sediment buildup<br />
• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes<br />
• Eco-friendly Green Choice gas burner reduces NOx emissions by 33% compared<br />
to standard burners<br />
• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition<br />
• CoreGard aluminum anode rod with stainless steel core provides added<br />
protection against tank corrosion<br />
• Factory-installed temperature and pressure (T&P) relief valve<br />
• Tamper-resistant brass drain valve<br />
• 6-year warranty on tank and parts<br />
• 8-year extended warranty available on all models<br />
• 10-year tank warranty available on all models<br />
HIGH<br />
RECOVERY<br />
HIGH<br />
EFFICIENCY<br />
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD<br />
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET<br />
GCVT-40 88 .60 38 50,000 48 58-1/2 20-1/2 4<br />
GCVT-50 90 .58 48 50,000 51 60-7/8 20 4<br />
GCVX-50 93 .58 50 65,000 67 63-7/8 22 4<br />
GCG-65** 112 .55 65 65,000 67 63-1/4 22 4<br />
FCG-75** N/A N/A 74 75,100 81 61 26-1/2 4<br />
FCG-100** N/A N/A 98 75,100 81 68-1/2 26-1/2† 4<br />
GVR-30 66 .63 30 40,000 41 62-3/8 18 3 or 4<br />
GVR-40 71 .62 40 40,000 41 59-7/8 20-1/2 3 or 4<br />
GVR 50 80 .62 50 40,000 41 60-7/8 22 3 or 4<br />
*Height to top of draft hood.<br />
**Not equipped with C3 Technology.<br />
For 10-year tank warranty, change “G” to “X” in model number ( XCVT-40). On 75-gallon<br />
and 100-gallon models, change “F” to ”P” in model number (PCG-75).<br />
†When model ordered as propane diameter increases to 27-3/4˝.<br />
6<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.
GAS WATER HEATERS<br />
ProMax ®<br />
A terrific value for homes that need an economical water heater that will perform<br />
exceptionally well for years.<br />
• C3 Technology “Flammable Vapor Ignition Resistant” System<br />
• DynaClean diffuser dip tube – reduces lime and sediment buildup<br />
• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes<br />
• Eco-friendly Green Choice gas burner reduces NOx emissions by 33% compared<br />
to standard burners<br />
• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition<br />
• CoreGard aluminum anode rod with stainless steel core provides added<br />
protection against tank corrosion<br />
• Tamper-resistant brass drain valve<br />
• Factory-installed temperature and pressure (T&P) relief valve<br />
• 6-year warranty on tank and parts<br />
• 8-year extended warranty available on all models<br />
• 10-year tank warranty available on all models<br />
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD<br />
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET<br />
GCV-30 66 .62 28 40,000 41 59-5/8 16 3 or 4<br />
GCV-40 71 .60 38 40,000 39 57-5/8 18-1/2 3 or 4<br />
GCV-50 91 .58 50 40,000 41 60-7/8 20 3 or 4<br />
GCVL-30 66 .61 30 40,000 40 48-1/8 18-1/2 3 or 4<br />
GCVL-40 71 .59 40 40,000 41 51-5/8 20 3 or 4<br />
GCVL-50 80 .58 50 40,000 41 53-1/4 24 3 or 4<br />
*Height to top of draft hood.<br />
For 10-year tank warranty, change “G” to “X” in model number ( XCV-30).<br />
Energy-Saver Manufactured Housing<br />
• All models meet HUD requirements for manufactured housing installation<br />
• Available in standard-vent or direct-vent design<br />
• Convertible gas control for natural gas or propane gas operation<br />
• Side-mounted cold water inlet, top-mounted hot water outlet<br />
• Roof jack kits available for direct-vent models, with intake air<br />
and exhaust vents<br />
• Eco-friendly Green Choice gas burner reduces NOx emissions by 33%<br />
compared to standard burners<br />
• Aluminum anode rod helps protect against tank corrosion<br />
• External heat traps<br />
• Factory-installed temperature and pressure (T&P) relief valve<br />
• Thick CFC-free foam insulation<br />
• 6-year tank/2-year parts warranty<br />
STANDARD<br />
ATMOSPHERIC<br />
VENT MODELS<br />
DIRECT<br />
VENT<br />
MODELS<br />
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD<br />
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET<br />
FMG-30 54 .61 30 30,000 31 59-1/2 18 3<br />
FMG-40 63 .59 40 30,000 31 60 20 3<br />
FMG-50 77 .58 50 38,000 39 63 22 3 or 4<br />
FMD-30 54 .61 30 30,000 31 56 18 -<br />
FMD-40 64 .59 40 32,000 33 56-1/2 20 -<br />
FMD-50 77 .58 50 38,000 39 56-1/2 22 -<br />
*Height to top of draft hood.<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.<br />
7
Residential<br />
Gas<br />
Specialty-Vent<br />
Specialty-vent gas water heaters are an alternative to standard metal-vent water heaters.<br />
They provide venting flexibility in replacement applications and offer useful choices for location of<br />
gas water heaters in new homes. Specialty-vent benefits include...<br />
Flexible Installation – Horizontal-venting options allow tremendous flexibility for placement of<br />
the water heater in the home. For example, A. O. <strong>Smith</strong> Power Shot ® power vent and Sealed<br />
Shot ® power direct-vent can vent up to 40 feet, using inexpensive PVC, CPVC or ABS pipe.<br />
Direct-venting for proper combustion – Insufficient indoor ventilation can deprive a gas<br />
water heater of enough air for proper operation. Sealed Shot ® power direct-vent and Sure Shot ®<br />
direct-vent water heaters have “two-pipe” systems that vent to and draw air from outside the<br />
home, eliminating concerns about indoor ventilation.<br />
Power Direct-Vent<br />
• Two-pipe “closed combustion” system permits combined horizontal and vertical venting<br />
and air intake runs up to 45 feet<br />
• Uses 3” Schedule 40 PVC, CPVC or ABS pipe<br />
• Quiet modular blower, with 110V/120V electrical system (rating 3 amps or less), with<br />
7-foot cord, standard 3-prong male connector<br />
• Advanced Intelli-Vent gas control valve with silicon nitride hot surface igniter (see page 3)<br />
• Eco-friendly Green Choice gas burner reduces NOx emissions by 33% compared<br />
to standard burners<br />
• Heat Trap Nipples Installed (3/4˝ male connection)<br />
• CoreGard aluminum anode rod with stainless steel core provides added<br />
protection against tank corrosion<br />
• Factory-installed temperature & pressure (T&P) relief valve<br />
• Tamper-resistant brass drain<br />
• 6-year warranty on tank and parts<br />
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE<br />
GALLONS NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.<br />
GPDH-40 73 .59 40 40,000 41 57 21 3<br />
GPDH-50 80 .58 50 40.000 41 66 21 3<br />
GPDT-50 80 .58 50 65,000 64 69-1/2 21 3<br />
GPDX-75 123 .53 75 70,000 72 71-1/2 26-1/4 3<br />
*Height to top of blower outlets.<br />
8<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.
GAS WATER HEATERS<br />
• Performance that rivals a 75-gallon<br />
gas water heater<br />
• Delivers “endless hot water”<br />
Power-Vent<br />
• Completely surrounded by water in tank, improves heat<br />
transfer surface over standard straight flue tube<br />
• Helps produce 90% thermal efficiency, which saves money<br />
on operating costs compared to a standard 78% efficient<br />
gas water heater<br />
• Versatile power-vent design allows combined vertical and<br />
horizontal vent runs terminating through an outside wall,<br />
using Schedule 40 PVC pipe<br />
• Modular blower equipped with 120V, 60Hz electrical system<br />
(rating 5 amps or less), 6-foot cord with standard 3-prong<br />
connector<br />
• Two heavy-duty commercial-grade anodes ensure<br />
protection against corrosion<br />
• Intelli-Vent gas control for more precise<br />
water temperature control<br />
• Side-mounted hot and cold recirculating taps<br />
• Long-lasting pex cross-link polymer diffuser dip tube<br />
• Six-year limited warranty on tank and parts<br />
* Height to top of blower outlet.<br />
** Distance from back of heater to front of gas valve.<br />
For further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.<br />
9
Residential<br />
Gas<br />
ProMax ® Power-Vent<br />
• 40- and 50-gallon residential gas water heaters equipped with<br />
patented C3 Technology ® design<br />
• Meet Phase II of the ANSIZ21.10.1 standards for flammable vapor<br />
ignition resistance<br />
• Vent using 2, 3 or 4 Schedule 40 PVC, CPVC or ABS pipe<br />
• System versatility allows combined horizontal and vertical vent runs up to<br />
120 equivalent feet with 3 pipe, up to 160 equivalent feet with 4 pipe on<br />
40,000 BTU and 50,000 BTU models<br />
• Equipped with a nearly indestructible silicon nitride hot<br />
surface ignitor—no standing pilot<br />
• Exclusive Power-Vent blower specifically designed and manufactured<br />
by A. O. <strong>Smith</strong><br />
• Exclusive A. O. <strong>Smith</strong> Coregard aluminum anode rod with stainless<br />
steel core protects tank against corrosion<br />
• 6-year limited warranty on tank and parts<br />
10<br />
For further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.
GAS WATER HEATERS<br />
Direct-Vent<br />
• One pipe/dual-channel system permits<br />
horizontal venting and air intake on most<br />
models up to 4 feet from outside wall<br />
• No electrical power needed<br />
• Eco-friendly Green Choice gas burner<br />
reduces NOx emissions by 33% compared<br />
to standard burners<br />
• Heat Trap Nipples Installed<br />
(3/4˝ male connection)<br />
• CoreGard aluminum anode rod with<br />
stainless steel core provides added<br />
protection against tank corrosion<br />
• Factory-installed temperature & pressure<br />
(T&P) relief valve<br />
• Tamper-resistant brass drain valve<br />
• 6-year warranty on tank and parts<br />
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE<br />
GALLONS NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.<br />
GDVS-40 68 .59 40 36,000 36 63-3/4 21 3 x 6<br />
GDVH-40 71 .59 40 40,000 40 63-3/4 21 3 x 6<br />
GDVS-50 77 .58 50 38,000 38 72-1/2 21 3 x 6<br />
GDVH-50 87 .58 50 48,000 49 76 21 3 x 6<br />
GDVH-75 109 .53 75 55,000** 52 76-1/2 26-1/4 3 x 6<br />
*Minimum height to top of dual-channel vent pipe.<br />
**Natural gas only.<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.<br />
11
Residential<br />
Gas<br />
ProMax ®<br />
SL<br />
For recirculating hot water loop systems<br />
A. O. <strong>Smith</strong> ProMax SL “side loop” gas water heaters are designed with side-mounted recirculating<br />
taps for installations with combination space heating/water heating applications (such as with air<br />
handlers) or any system requiring a recirculating hot water loop.<br />
All ProMax SL water<br />
heaters are equipped<br />
with side-mounted<br />
recirculating taps, like<br />
the standard-vent<br />
model shown above.<br />
ProMax SL water heaters are available in Standard Vent (including self-cleaning DynaClean II<br />
models), Direct-Vent, Power-Vent and Power Direct-Vent models. All models include the following<br />
features:<br />
• Commercial-grade PermaGlas lining for longer life<br />
• Durable, tamper-resistant brass drain valve<br />
• High-temperature DynaClean II diffuser dip tube reduces lime and sediment buildup<br />
• Eco-friendly Green Choice gas burner reduces NOx emissions by 33% compared<br />
to standard burners<br />
• Factory-supplied temperature & pressure (T&P) relief valve<br />
• Optional circulating loop connection assemblies available<br />
• 6-year warranty on tank and parts<br />
Standard Vent<br />
• Standard or self-cleaning models (equipped with advanced DynaClean II<br />
automatic sediment cleaning system)<br />
• C3 Technology system on 40- and 50-gallon models<br />
• Dual anode rods for superior protection against corrosion<br />
• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition<br />
MODEL FIRST HOUR ENERGY GALLON BTU INPUT BTU OUTPUT RECOVERY DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY PER HOUR PER HOUR 90°F RISE DRAFT HOOD<br />
GALLONS NATURAL NATURAL GALLONS HEIGHT* DIAMETER OUTLET<br />
GCVH-40L 71 .59 40 40,000 29,600 40 59-7/8 18-1/2 3 or 4<br />
GCVT-40L 88 .60 38 50,000 35,000 48 58-1/2 20-1/2 4<br />
GCVT-50L 90 .58 48 50,000 38,000 51 60-7/8 20 4<br />
GCVX-50L 93 .58 50 65,000 50,100 67 63-7/8 22 4<br />
GCG-65L** 112 .55 65 65,000 49,400 67 63-1/4 22 4<br />
FCG-75L** N/A N/A 74 75,100 60,100 81 61 26-1/2 4<br />
XGV-40L 81 .63 40 40,000 30,400 41 63-1/2 20-1/2 3 or 4<br />
XGV-50L 97 .63 50 40,000 32,400 44 65 22 3 or 4<br />
GCVH-40Q 71 .59 40 40,000 29,600 40 59-7/8 18-1/2 3 or 4<br />
GCVT-40Q 88 .60 38 50,000 35,000 48 58-1/2 20-1/2 4<br />
GCVT-50Q 90 .58 48 50,000 38,000 51 60-7/8 20 4<br />
GCVX-50Q 93 .58 50 65,000 50,100 67 63-7/8 22 4<br />
GCG-65Q** 112 .55 65 65,000 49,400 67 63-1/4 22 4<br />
FCG-75Q** N/A N/A 74 75,100 60,100 81 61 26-1/2 4<br />
*Height to top of draft hood.<br />
**Not equipped with C3 Technology.<br />
12<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.
GAS WATER HEATERS<br />
Direct-Vent<br />
• Closed-combustion dual-channel vent system – draws combustion air from outside, vents to<br />
outside the home<br />
• System permits horizontal venting up to 4 feet<br />
• No electrical power required<br />
MODEL FIRST HOUR ENERGY GALLON BTU INPUT BTU OUTPUT RECOVERY DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY PER HOUR PER HOUR 90°F RISE<br />
GALLONS NATURAL NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.<br />
GDVH-40L 71 .59 40 40,000 30,000 40 63-3/4 21 3 x 6<br />
GDVH-50L 87 .58 50 48,000 36,480 49 76 21 3 x 6<br />
GDVH-75L 109 .53 75 55,000** 41,800 53 76-1/2 26-1/4 3 x 6<br />
*Minimum height to top of dual-channel vent pipe.<br />
**Natural gas only.<br />
Power-Vent<br />
• 40- and 50-gallon residential gas water heaters equipped with<br />
patented C3 Technology ® design and meet Phase II of the ANSIZ21.10.1<br />
standards for flammable vapor ignition resistance<br />
• Vent using 2, 3 or 4 Schedule 40 PVC, CPVC or ABS pipe<br />
• System versatility allows combined horizontal and vertical vent runs up to<br />
120 equivalent feet with 3 pipe, up to 160 equivalent feet with 4 pipe on<br />
40,000 BTU and 50,000 BTU models<br />
• Equipped with a nearly indestructible silicon nitride hot<br />
surface ignitor—no standing pilot<br />
• Exclusive Power-Vent blower specifically designed and manufactured<br />
by A. O. <strong>Smith</strong><br />
• Exclusive A. O. <strong>Smith</strong> Coregard aluminum anode rod with stainless<br />
steel core protects tank against corrosion<br />
• 6-year limited warranty on tank and parts<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.<br />
13
Residential<br />
Gas<br />
Power Direct-Vent<br />
• Closed-combustion two-pipe system<br />
draws combustion air from outside,vents<br />
to outside the home<br />
• Uses PVC, CPVC or ABS pipe<br />
• Vents up to 50 equivalent feet with 3˝ pipe<br />
• Quiet modular blower with 7-foot cord,<br />
standard 3-prong plug<br />
• Advanced Intelli-Vent gas control valve with<br />
silicon nitride hot surface igniter (see page 3)<br />
• Dual anode rods on 40- and 50-gallon models<br />
MODEL FIRST HOUR ENERGY GALLON BTU INPUT BTU OUTPUT RECOVERY DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY PER HOUR PER HOUR 90°F RISE<br />
GALLONS NATURAL NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.<br />
GPDH-40L 73 .59 40 40,000 30,000 41 57 21 3<br />
GPDT-50L 80 .58 50 65,000 47,500 64 69-1/2 21 3<br />
GPDX-75L 123 .53 75 70,000 53,200 72 71-1/2 26-1/4 3<br />
*Height to top of blower outlets.<br />
14<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.
GAS WATER HEATERS<br />
XT 190L<br />
XT 199L<br />
On-Demand<br />
• Installed individually or in multiples from 2 units (XT-199 or XT-236 only)<br />
to 24 units (XT-236 only), ProStar offers an alternative way to meet<br />
needs of homes with extremely high hot water demand<br />
• Modulating input adjusts with demand: XT-190 and XT-199 modulate from<br />
25,000 to 190,000 BTU/Hour; XT-236 modulates from 21,000 to 236,000<br />
BTU/Hour<br />
• Energy-efficient copper heat exchanger with durable copper tube and sheet<br />
construction<br />
• Remote control offers digital display of thermostat setting, push-button<br />
adjustment, and indicator light for burner operation (provided with XT-<br />
199, XT-236, optional accessory on XT-190)<br />
• 10-year limited warranty on heat exchanger<br />
• 3-year limited warranty on parts<br />
XT 236L<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.<br />
15
Residential<br />
Electric<br />
Conservationist ®<br />
The top of the line Conservationist electric water heater is fully loaded with all A. O. <strong>Smith</strong>’s<br />
leading innovations. For consumers looking for maximum energy savings and excellent output,<br />
the Conservationist is the model of choice.<br />
• Our most efficient electric models, for maximum savings on operating costs with 3˝ thick<br />
CFC-free insulation, external heat traps<br />
• DynaClean II automatic sediment-cleaning system – creates turbulence in tank for<br />
maximum protection against lime and sediment buildup<br />
• Blue Diamond Glass Coating – A. O. <strong>Smith</strong> innovation delivers over twice the corrosion<br />
resistance compared to industry-standard glass lining<br />
• 4500-watt Phoenix low-watt density Incoloy steel upper and lower heating elements –<br />
designed to operate more efficiently and last 2-3 times longer than standard copper<br />
elements<br />
• Tamper-resistant brass drain valve<br />
• Factory-supplied temperature & pressure (T&P) relief valve<br />
• Extra warranty protection – 10 years on the tank and parts<br />
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY<br />
GALLONS STD. 240V MAX. 240V HEIGHT DIAMETER<br />
UPPER/LOWER UPPER/LOWER<br />
TALL MODELS<br />
PXHT-40 56 .95 40 4500 5500 60-1/2 20<br />
PXHT-52 60 .95 50 4500 5500 57 22-1/2<br />
PXHT-66 72 .95 66 4500 5500 62 24<br />
PXHT-80 81 .95 80 4500 5500 62 26<br />
SHORT MODELS<br />
PXHS-40 52 .95 40 4500 5500 47 22-1/2<br />
PXHS-50 62 .95 50 4500 5500 50 24<br />
Recovery capacity based on actual performance test.<br />
<strong>Water</strong> connections: 3/4" male NPT on all models.<br />
Top-mounted T&P valve not available.<br />
16<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.
ELECTRIC WATER HEATERS<br />
ProMax ® Plus High Efficiency<br />
ProMax Plus High Efficiency is a great combination of value and savings, meeting<br />
energy-efficiency requirements for most electric utility rebate programs.<br />
• Meets energy-efficiency requirements for most electric utility programs,<br />
Energy Star Home Program recommendations and Title 24 requirements<br />
• 2-1/2˝ thick CFC-free foam insulation<br />
• Energy-saving external heat traps (3/4˝ male connection)<br />
• DynaClean diffuser dip tube reduces lime and sediment buildup<br />
• Durable, tamper-resistant brass drain valve<br />
• Factory-supplied temperature & pressure (T&P) relief valve<br />
• 6-year warranty on tank and parts<br />
• 8-year extended warranty available on 40- through 66-gallon models<br />
• 10-year tank warranty available on all models<br />
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY<br />
GALLONS STD. 240V MAX. 240V HEIGHT DIAMETER<br />
UPPER/LOWER UPPER/LOWER<br />
TALL MODELS<br />
ECRT-40 54 .93 40 4500 6000 60 19<br />
ECRT-52* 60 .93 50 4500 6000 56-1/2 21-1/2<br />
ECRT-66 76 .93 66 4500 6000 61 23<br />
ECRT-80* 87 .93 80 4500 6000 61-1/2 25<br />
SHORT MODELS<br />
ECRS-50 62 .93 50 4500 6000 49 23<br />
Recovery capacity based on actual performance test.<br />
For 10-year tank warranty, change “E” to “P” in model number (PCRT-40).<br />
*Models not available with top T&P.<br />
For further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.<br />
17
Residential<br />
Electric<br />
ProMax ®<br />
A terrific value for homes that need an economical water heater that will perform<br />
exceptionally well for years.<br />
• Tall, Short and Lowboy (top connect) models available<br />
• Thick CFC-free foam insulation<br />
• DynaClean diffuser dip tube reduces lime and sediment buildup<br />
• Durable, tamper-resistant brass drain valve<br />
• Factory-supplied temperature & pressure (T&P) relief valve<br />
• 6-year warranty on tank and parts<br />
• 8-year extended warranty available on 30- through 66-gallon models<br />
• 10-year tank warranty available on all models<br />
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY<br />
GALLONS STD. 240V MAX. 240V HEIGHT DIAMETER<br />
UPPER/LOWER UPPER/LOWER<br />
TALL MODELS<br />
ECT-30** 43 .93 30 4500 6000 46-1/2 18<br />
ECT-40 52 .92 40 4500 6000 59-1/2 18<br />
ECT-52 62 .91 50 4500 6000 54 20-1/2<br />
ECT-55† 67 .90 55 4500 6000 60-1/4 20-1/2<br />
ECT66 72 .88 66 4500 6000 60-1/4 22<br />
ECT-80† 81 .86 80 4500 6000 60-1/2 24<br />
ECT-120*† 112 .81 119 4500 6000 64-1/4 28<br />
SHORT MODELS<br />
ECS-30** 43 .93 30 4500 6000 36-1/2 20-1/2<br />
ECS-40** 52 .92 40 4500 6000 44 20-1/2<br />
ECS-50** 62 .90 50 4500 6000 48 22<br />
LOWBOY MODELS<br />
ELJC-6 N/A N/A 6 1500 @ 120 2500 15-1/2 14-1/4<br />
ELJC-15 N/A N/A 15 1500 @ 120 2500 32-1/4 14-1/4<br />
ELJC-20 N/A N/A 19 2500 @ 120 6000 32-1/4 18<br />
ECL-30** 41 .93 29 4500 6000 30 22<br />
ECLN-40** 48 .92 38 4500 6000 31-1/2 23<br />
ECL-50** 55 .91 50 4500 6000 34 26-1/2<br />
Recovery capacity is based on actual performance tests.<br />
For 10-year tank warranty, change “E” to “P” in model number (PCT-40).<br />
*This model is not available with top T&P valve.<br />
PCL-40 and PCL-50 are not available with top T&P.<br />
**Models supplied with Heat Trap Nipples.<br />
†Models with installed Nipples.<br />
All water connections are 3/4" NPT.<br />
18<br />
For further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.
ELECTRIC WATER HEATERS<br />
ProMax ® Specialty Electric<br />
To make the most out of limited space or deliver small amounts of hot water for small-demand<br />
applications, A. O. <strong>Smith</strong> offers three ProMax Specialty choices. 6-year tank and parts warranty on<br />
all models.<br />
• Table Top - Featuring convenient flat surface at 36˝ height to provide extra<br />
“counter space.” All plumbing and electrical connections through back of heater.<br />
Table Top<br />
Lowboy<br />
Point-of-Use<br />
• Lowboy Side Connect - Compact design, with side-mounted plumbing and electrical<br />
connections, for installation under a counter or in other tight spaces.<br />
Single heating element.<br />
• Point-Of-Use - For low-demand point-of-use applications. Single heating element.<br />
110/120V cord set with 3-prong plug. Wall mounting supplied.<br />
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONS<br />
NUMBER RATING FACTOR CAPACITY<br />
GALLONS<br />
STANDARD MAXIMUM HEIGHT DIAMETER<br />
TABLE TOP<br />
ESTT-30 45 .89 27 4500* 6000 36 21**<br />
ESTT-40 52 .88 40 4500* 6000 36 24**<br />
LOWBOY SIDE-CONNECT MODELS<br />
ELSC-10S N/A N/A 10 1500 @ 120 3000 18 18<br />
ELSC-15S N/A N/A 15 1500 @ 120 3000 25-3/4 18<br />
ELSC-20S N/A N/A 19 2500 3000 22-1/4 21-3/4<br />
ECJ-30 37 .93 29 4500* 6000 30 22<br />
ECJ-40 43 .92 40 4500* 6000 32-1/4 25<br />
POINT-OF-USE MODELS<br />
ELJC-2 N/A N/A 2 1440 @ 120V 12-3/4† 10<br />
ELJC-4 N/A N/A 4 1440 @ 120V 20† 10<br />
Dimension from floor to cold water inlet on all lowboy side-connect models is 3-1/2".<br />
Point-of-Use models have 1/2" inlet and outlet connections. All others are 3/4" NPT.<br />
*240V standard element.<br />
**Depth (front to back) of both table top models is 25-1/8". Width is 21" for<br />
ESTT-30 and 24" for ESTT-40.<br />
†Top mounted T&P adds approx. 3" additional to overall unit height.<br />
Energy Saver Manufactured Housing<br />
• All models meet HUD requirements for manufactured housing installation<br />
• Side-mounted cold water inlet and hot water outlet<br />
• Two heating elements on 30-, 40- and 50-gallon models<br />
• Aluminum anode rod for added protection against tank corrosion<br />
• Factory-installed temperature and pressure (T&P) relief valve<br />
• Thick CFC-free foam insulation<br />
• 5-year tank/1-year parts warranty<br />
MODEL FIRST HOUR ENERGY GALLON STD. RECOVERY R HEIGHT DIAMETER<br />
NUMBER RATING FACTOR CAPACITY VOLTAGE/WATTAGE 90°F RISE VALUE<br />
GALLONS<br />
GALLONS<br />
ESM-20 - - 19.9 120V, 1650 Watts 8 12 34 17<br />
ESM-30 43 .93 30 240V, 3800 Watts 17 16 37-1/2 20-1/2<br />
ESM-40 51 .93 40 240V, 3800 Watts 17 16 46 20-1/2<br />
ESM-50 58 .95 50 240V, 3800 Watts 17 16 56 20-1/2<br />
All Dimensions in Inches.<br />
All water connections 3/4" NPT.<br />
For propane gas inputs, further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.<br />
19
Pump &<br />
Expansion Tank<br />
ProMax ® Pump Tanks<br />
• Multiple head construction adds structural strength<br />
and more capacity within the same diameters<br />
• Interior epoxy coating is permanently bonded<br />
to the tank shell for ultimate protection on the<br />
water side of the tank<br />
• Durable butyl diaphragm ensures long life<br />
• Positive lock retention system controls compression in<br />
the diaphragm connection, eliminating air loss or<br />
water leaks in tank<br />
• Electrostatically applied powder-coated exterior for<br />
maximum sunlight (UV) resistance in outside<br />
installations, with zinc phosphate undercoat for<br />
highest corrosion resistance<br />
• Metal air valve<br />
• Welded steel base<br />
• 5-year limited warranty<br />
20<br />
For further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.
PUMP & EXPANSION TANKS<br />
ProMax ® Expansion Tanks<br />
• Multiple head construction adds structural strength and<br />
more capacity within the same diameters<br />
• Interior epoxy coating is permanently bonded to the tank<br />
shell for ultimate protection on the water side of the tank<br />
• Durable butyl diaphragm ensures long life<br />
• Positive lock retention system controls compression<br />
in the diaphragm connection, eliminating air loss<br />
or water leaks in tank<br />
• Electrostatically applied powder-coated exterior<br />
for maximum sunlight (UV) resistance in outside<br />
installations, with zinc phosphate undercoat for<br />
highest corrosion resistance<br />
• Metal air valve<br />
• Welded steel base<br />
• 5-year limited warranty on potable expansion tanks<br />
• 1-year limited warranty on hydronic expansion tanks<br />
For further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.<br />
21
Solar<br />
Booster Tank<br />
Solar Booster Tanks<br />
• 80- and 120-gallon electric water heaters<br />
specifically designed for installation as part<br />
of direct solar water heating systems<br />
• Multiple connection options for installation<br />
flexibility, with incoming and outgoing water<br />
connections through side or top of unit<br />
• A. O. <strong>Smith</strong> Dynaclean diffuser dip tube made<br />
from pex cross-linked polymer helps reduce lime<br />
and sediment buildup to maximize hot water output<br />
• A. O. <strong>Smith</strong> Permaglas ® patented glass tank coating<br />
helps withstand steel tank corrosion and rust<br />
• Durable tamper-resistant brass drain valve<br />
• 2˝ thick foam insulation (R-16) for high efficiency factory<br />
installed temperature and pressure (T&P) relief valve<br />
• 6-year limited warranty on tank and parts<br />
22<br />
For further detailed information on warranties and technical specifications,<br />
visit www.hotwater.com to view and download specifications.
NOTES<br />
23
Residential<br />
A. O. SMITH WATER HEATERS<br />
500 Tennessee Waltz Parkway<br />
Ashland City, TN 37015<br />
www.hotwater.com<br />
A.O. <strong>Smith</strong> reserves the right to make product changes or improvements at any time without notice.<br />
A. O. <strong>Smith</strong> reserves the right to make product changes or improvements at any time without notice.<br />
Form No. ARBCA00106<br />
October 2006R<br />
5M-MSI-0104 ©2006 A. O. <strong>Smith</strong> Corporation Printed in U.S.A.