Components Catalog - Sani-Matic, Inc.

ACCESSORIES
In-Tank Steam Mixer/Sparger
The purpose of a steam mixer/sparger is to effectively mix steam
with water in the tank to reduce noise and maximize the heating
capacity. Steam mixers/spargers are attached to either in-tank
piping or a coupling that is mounted through the sidewall of a tank.
Sizing is determined by the steam valve through which steam
is delivered.
Material: 316 stainless steel
Connection type: MNPT threaded connection
Connection Size Length Part # Price
0.5" 9.75” 741162 $ 325
0.75" 9.81” 740859 $ 325
1.0" 7.00” 741137 $ 325
1.25" 7.00” 640842 $ 325
1.5" 9.00” 540042 $ 325
Please note: Maximum pressure for Mixer/Sparger is determined by the incoming connection line.
Steam Regulator Valve
The steam regulator automatically controls the temperature of
your cleaning unit without the use of external power. With a vapor
pressure thermal system, the steam regulator senses temperature
change and positions the valve plug to regulate the heating or
cooling medium to maintain a desired temperature.
Material: Brass
Connections: FNPT
Connection Size Part # Price
0.5” 020494 $ 900
0.75” 020495 $ 1,000
1.0” 020506 $ 1,168
Thermowell for Steam Regulator Thermal Bulb (not pictured)
Materials: Tube - 321 Stainless Steel, 10.5” long, 1.0 MNPT
Fitting - Brass
Part #
Price
120002 $ 95
Electric Immersion Heater
Manual Thermostat, 3” Tri-Clamp,
Nema 4x Head, 50° - 250°F, 460 VAC
Connection Size Part # Price
7.5 KW 023997 $ 1,597
9.0 KW 029529 $ 1,607
12.0 KW 024296 $ 1,617
Additional voltages and sizes available upon request
22
Level Probe
The three point level probe maintains the correct solution levels
in a tank. 2” tri-clamp connection for mounting on the top of each
tank. Lumenite level controls are mounted in the control panel.
Part #
Price
220293 $ 237
For replacement level probes, please measure the lengths of existing model.
All probes are cut to length.
sanimatic.com