EFIS-D100 Installation Guide - Dynon Avionics
EFIS-D100 Installation Guide - Dynon Avionics EFIS-D100 Installation Guide - Dynon Avionics
Wiring Overview 25-Pin Female EFIS Harness Below is the wiring diagram of the EFIS 25-pin female harness. If you purchased your harness from Dynon Avionics, it is color coded according to the chart on the following page. Unless noted otherwise, all wires are 3 feet long on the Dynon-provided harness. 2-2 EFIS-D100 Installation Guide
Wiring Overview The pin assignments for the female 25-pin harness are repeated below. Note that the pin numbers are labeled on the face of both the female and male connector. Each connection on the harness supplied by Dynon is color-coded. These colors are listed in the following chart. Female DB25 Pin # Dynon Harness Wire Color Function Details 1 Red Master Power (10-30 volts) Page 3-3 2 Yellow Keep Alive Power (10-30 volts, Page 3-3 always on) 3 Black Master Ground Page 3-3 4 Green DSAB-A Page 3-11 5 Blue DSAB-B Page 3-11 6 N/A No Connect 7 N/A No Connect 8 N/A No Connect 9 Black (bundled) PC Serial Ground Page 3-4 10 Orange (bundled) EFIS-D100 Transmit / PC Serial Receive (RS-232) Page 3-4 11 White/Orange (Red on some Page 3-1 EDC-D10A Data B harnesses) 12 White/Blue (Black on some Page 3-1 EDC-D10A Power (12V) harnesses) 13 Blue/White (black on some Page 7-32 Serial Encoder Transmit (RS-232) harnesses) 14 N/A No Connect 15 N/A External Backup Power Page 3-3 16 Black Ground 17 N/A No Connect 18 Green Audio out Page 3-10 19 N/A No Connect 20 N/A No Connect 21 White (Bundled in Encoder cable) 22 Yellow (Bundled) Serial Encoder Ground EFIS-D100 Receive / PC Serial Transmit (RS-232) Page 7-32 Page 3-4 23 White/Green (Green on some Page 3-1 EDC-D10A Data A harnesses) 24 White EDC-D10A GND Page 3-1 25 N/A No Connect EFIS-D100 Installation Guide 2-3
- Page 1: EFIS-D100 Installation Guide This p
- Page 5 and 6: Table of Contents Contact Informati
- Page 7 and 8: 1. INTRODUCTION This manual provide
- Page 9: 2. WIRING OVERVIEW Please follow th
- Page 13 and 14: 3. INSTRUMENT INSTALLATION This sec
- Page 15 and 16: Instrument Installation The metal s
- Page 17 and 18: e accessed whenever you need to upd
- Page 19 and 20: Instrument Installation (range, MPG
- Page 21 and 22: Instrument Installation SERIAL ALTI
- Page 23 and 24: Instrument Installation Dynon Smart
- Page 25: Connecting Static & Pitot Lines The
- Page 28 and 29: EFIS Calibration and Configuration
- Page 30 and 31: EFIS Calibration and Configuration
- Page 32 and 33: DSAB Configuration Example Networks
- Page 34 and 35: DSAB Configuration Initial Setup As
- Page 36 and 37: DSAB Configuration Network Status T
- Page 38 and 39: Autopilot Installation and Configur
- Page 40 and 41: Autopilot Installation and Configur
- Page 42 and 43: Autopilot Installation and Configur
- Page 44 and 45: Autopilot Installation and Configur
- Page 46 and 47: Autopilot Installation and Configur
- Page 48 and 49: Autopilot Installation and Configur
- Page 50 and 51: Autopilot Installation and Configur
- Page 52 and 53: Autopilot Installation and Configur
- Page 54 and 55: Autopilot Installation and Configur
- Page 56 and 57: Autopilot Installation and Configur
- Page 58 and 59: Autopilot Installation and Configur
Wiring Overview<br />
25-Pin Female <strong>EFIS</strong> Harness<br />
Below is the wiring diagram of the <strong>EFIS</strong> 25-pin female harness. If you purchased your harness<br />
from <strong>Dynon</strong> <strong>Avionics</strong>, it is color coded according to the chart on the following page. Unless<br />
noted otherwise, all wires are 3 feet long on the <strong>Dynon</strong>-provided harness.<br />
2-2 <strong>EFIS</strong>-<strong>D100</strong> <strong>Installation</strong> <strong>Guide</strong>