Demmeler Parts Calalogue - Leussink Engineering

Demmeler Stops Index
Presentation Item Code Description Technical Description
4004 Stop Round
4005 Stop Half Round
- The holes in the universal stop serves as a clamp lock for all
swing clamps, offered in the catalogue, or for mounting of toggle
clamps with a special adaptor
4009 Stop Universal (spring Loaded)
- The universal stop can be located and locked on 5 -sides of the
table's grid pattern in increments of 25mm or on angles of 45°, 90°,
135°, & 180°
5000 Stop Universal (Large)
- The special shape of this universal stop allows setting of
workpieces around all sides and also in the milled notches
5001 Stop Universal
5002 Stop Universal (Small)
5003 Bar Stop 500mm
Round Stop
- Locates in any Ø28 hole
- Supported by O Rings
- Used as a stop
Size ∅30 x 50mm
Half Round Stop
- Locates in any Ø28 hole
- Supported by O Rings
- Used as a stop
Size 15 x 50mm
Universal Stop (Spring Loaded)
- Ideal for sheet metal.
- Spring loaded action at the end of this stop locates
material in position without clamps
Size 225 x 50 x 25mm
Universal Stop (Large)
- Longer slot for additional adjustment
- Located square with PC Bolts
Size 250 x 50 x 25mm
Universal Stop
- This stop is fixed or infinitely adjustable on the
Demmeler table and accessories
- One stop creates 2 location points
Size 225 x 50 x 25mm
Universal Stop (Small)
- This small universal stop is used in areas where
space is tight
- function as 5001, not infinitely adjustable
- One stop creates 2 location points
Size 100 x 50 x 25mm
Stop Bar
- Function as 5001, but longer
- Large dimensions, higher stability, more clamping
and fixturing possibilities as 5001 and 5002
Size 500 x 100 x 25mm
Example: Typical Demmeler Fixturing
set-up of RHS frame using various stops
Page 12 of 20
Ref.20091216