Demmeler Parts Calalogue - Leussink Engineering

Standard Parts List 

Version 4.0 

System D 28 

Universal Working & Welding Tables 

System & Accessories 

PARTS INDEX 

1000 Kits 

1000 Tables 

2000 Rails & Adaptors 

3000 Angles 

4000 U & L Shaped Blocks 

5000 Stops 

6000 PC Bolts 

7000 & 8000 Clamps 

9000 V-Blocks 

10000 & 11000 Accessories 

Copyright © 2009 C & M Leussink Engineering Pty Ltd. All rights reserved 

Page 1 of 20 

Ph: (+61) 02 4260 7777 

Fax: (+61) 02 4260 7788 

www.leussink.com.au 

info@leussink.com.au 

Ref.20091216

Item Code 

1001F 

1001K 

Description 

1000 x 1000 3-D Full 

1000 x 1000 3-D Standard 

Demmeler Fixturing Kits Index 

For a complete list of items contained in 

each kit refer to our 

Demmeler Kit Catalogue.pdf 

1001S 

1000 x 1000 3-D Starter 

1001S - 1000 x 1000 3D Starter 

1001-2F 1200 x 1200 3-D Full 

1001-2K 1200 x 1200 3-D Standard 

1001-2S 1200 x 1200 3-D Starter 

1001-5F 1500 x 1500 3-D Full 

1001-5K 1500 x 1500 3-D Standard 

1001-5S 1500 x 1500 3-D Starter 

1002F 2000 x 1000 3-D Full 

1002K 2000 x 1000 3-D Standard 

An example of our standard kit on a 3000 

x 1500 3D table. This kit contains the 

table, an assortment of angles, various 

clamp types, long & short stops, PC bolts, 

a number of spacer set, "V" Blocks, lifting 

shackle, Splatter Guard & Organic 

Natural Cleaner, 

Also a handy accessory storage cart. 

1004K - 3000 x 1500 3D Standard 

An example of our starter kit on a 1000 

x 1000 3D table. This kit contains the 

table, angles, clamps, stops, PC bolts, 

a spacer set, also Splatter Guard & 

Organic Natural Cleaner. 

1002S 

1003F 

1003K 

1003S 

1004F 

1004K 

1004S 

1005S 

2000 x 1000 3-D Starter 

2400 x 1200 3-D Full 


2400 x 1200 3-D Starter 

3000 x 1500 3-D Full 


3000 x 1500 3-D Starter 

1000 x 1000 2-D Starter 

1007F - 3000 x 1000 3D Full 

1006S 

1007F 

1007K 

1007S 

2000 x 1000 2-D Starter 

3000 x 1000 3-D Full 


3000 x 1000 3-D Starter 

An example of our full kit on a 3000 x 1000 3D 

table. This kit contains the table, an assortment 

of angles including 2 universal locating angles, 

extension blocks, various clamp types, long & 

short stops, PC bolts, a number of spacer set, 

"V" Blocks, universal protractors, lifting shackle, 

Splatter Guard & Organic Natural Cleaner plus 

spray bottle, 

Also a handy accessory storage cart. 

Page 2 of 20 

Ref.20091216

Demmeler Universal Work & Welding Table Index 

100mm Square grid lines marked on all tables 

Special table sizes, table heights and hydraulic lifts are available on request. 

Presentation Item Code Description Technical Description 

1001 Worktable 1000 x 1000 3D Demmeler 

- Weight Approx. 368kg 

- Dia. 28 Holes 

- 3D Table, Std. Hole Pattern 

- 220mm Overall Height of table 

1001H5 

Worktable 1000 x 1000 5 Hole 3D Demmeler 



- 3D Table, 5 Hole Pattern 


1001H9 

Worktable 1000 x 1000 Saturated 3D Demmeler 





1001-2 Worktable 1200 x 1200 3D Demmeler 





1001-2H5 Worktable 1200 x 1200 5 Hole 3D Demmeler 


- Dia.28 Holes 



1001-2H9 Worktable 1200 x 1200 Saturated 3D Demmeler 





1001-5 Worktable 1500 x 1500 3D Demmeler 





1001-5H5 Worktable 1500 x 1500 5 Hole 3D Demmeler 





1001-5H9 Worktable 1500 x 1500 Saturated 3D Demmeler 





Page 3 of 20 

Ref.20091216










1002H5 






1002H9 


- Weight Approx. 565 kg 




1002B 

Worktable 2000 x 1000 Blackened 3D Demmeler 



- 3D Table, Std. Hole, Blackened Top 


1002H 

Worktable 2000 x 1000 Hardened 3D Demmeler 



- 3D Table, Std. Hole, Hardened Top 


1002HB 

Worktable 2000 x 1000 Hardened & Blackened 3D Demmeler 



- 3D Table, Std Hole, Harden, Blacken Top 







1003H5 






1003H9 






Page 4 of 20 

Ref.20091216










1004H5 


- Weight Approx.1320kg 




1004H9 











1005H5 






1005H9 











1006H5 






1006H9 






Page 5 of 20 

Ref.20091216










1007H5 






1007H9 






1010 1500AF Hex Demmeler Table 

0808 800AF Hex Demmeler Table 



- Hex Shaped Table, Std. Hole Pattern 


- 1500mm Across Flats 



- Hex Shaped Table, Std. Hole Pattern 


- 800mm Across Flats 

Page 6 of 20 

Ref.20091216

Demmeler Universal Work & Welding Table Support Options Index 


1009-2D Assy 2D Table Leg 

Special sizes 

available 

on request 


- Leg with Dia.125mm nylon castor 

- 360 Degrees swivel 

- Intergrated brake 

- Max Load Per Leg 300kg 

- 630mm Overall height of leg 

1009-3D Assy 3D Table Leg 


- Leg with 30mm of adjustment 

- 630mm Overall height of leg 

ASC-900 

Demmeler Worktable with Scissor Lift 


- Lifting Weight Approx. 2000kg 

- Scissor lift with auto shutoff safety bar 

- Vertical travel from 1300mm to 400mm 

2004-10 Frame 1001 Spacer 



- Connection module between the base rail 2003 

and 3D table 

- Rapidly adaptable / interchangeable 

- Precise geometric location in all direction using 

PC bolts. To suit 1000 x 1000 Table 


and 3D table 





and 3D table 




There are many different support 

options available for the Demmeler 

Universal Work & Welding Table. 

Contact our expert sales team if you 

need help in configuring a system to 

suit your needs. 

Page 7 of 20 

Ref.20091216

Demmeler Rails & Adaptors Index 


2001-0704 Adaptor 700mm x 400mm High Density Plate 





- Weight 46.5kg 

- Use with Demmeler table for robot 

welding or with a welding positioner 

- As an interchangeable pallet 

- Both sides are usable 






- Weight 104kg 















2002 Bushing Support 

2003 Assembly Rail (800mm long) 

2003/S Assembly Rail (800mm long including scallops) 

2003-12 Assembly Rail (1200mm long) 

- Weight 0.9kg. 

- Serves as connection between system 

parts and other base plates 

- Size Dia. 79 x 75 mm 

- Weight 27kg per section 

- Serves to build large grid patterns 

- Anchored an leveled by mounting to floor 

- Screw sets, anchor bolts & leveling 

plates are included 


- Serves to build large grid patterns 





- Fixture large parts both directly on rails 

or indirectly on system components like 

the 3D table 



2003-12/S 

Assembly Rail (1200mm long including scallops) 



( rails can also be inlaid in floor) 



2003-20 Assembly Rail (2000mm long) 



(Long length for large areas) 



2005 Plate Flange Adaptor (350x250) 

- Manufactured to customer requirenents 

- Suit most standard flange sizes 

- Precise locating of pipe flange for 

fabrication 

Page 8 of 20 

Ref.20091216

Demmeler Rails & Adaptors Index 


2006 Plate Flange Adaptor (550x350) 

2007 Assembly Double Width Rail (800mm long) 

- Manufactured to customer requirenents 

- Suit most standard flange sizes 

- Precise locating of pipe flange for 

fabrication 


- Double row holes, used as centre rail 

- Anchored by mounting to floor 



2007-12/S 

2007/S 

Assembly Double Width Rail (1200mm long 

including scallops) 

Assembly Double Width Rail (800mm long 

including scallops) 






- Weight 52.3kg per section 





This is an example of a 

Demmeler table combination on 

a 3 foundation rails system 

This example is of a Demmeler 

adjustable trestle combination on a 3 

foundation rails system with operation 

platform plus surrounding kick strip 

This example is of the 

Demmeler flexible table & 

trestle solution on a 4 

foundation rails system 

Page 9 of 20 

Ref.20091216

Demmeler Angle Index 


Clamping & Locating Angle 

3001 Angle Clamping & Locating 175mm 

3002L Angle Clamping & Locating 300mm (Left Hand) 

3002R Angle Clamping & Locating 300mm (Right Hand) 





3005 Frame Support & Fixturing 

3006 Angle Flat 

3007 Angle Universal Swivel 

3008 Angle Universal (Small) 

3009 Stop Angular 

- Two sided 

- Fixed or infinitely adjustable 

Size 175 x 175 x 50mm 


- Left hand 


- Four sided 

Size 300 x 275 x 100mm 


- Right hand 


- Four sided 

Size 300 x 275 x 100mm 


- Left hand 


- Four sided 

Size 600 x 375 x 100mm 


- Right hand 


- Four sided 

Size 600 x 375 x 100mm 


- Left hand 


- Four sided 

Size 800 x 375 x 100mm 


- Right hand 


- Four sided 

Size 800 x 375 x 100mm 

Support & Fixturing Frame 

- Connection between 3D table & system parts 

- Universal combination: 50mm Increments & Slots 

- Minimum weight, high stability, easy handling 

Size (LxBxH) 300 x 200 x 100mm 

Flat Angle 

- Combinable left & right 

Size 500 x 375 x 25mm 

Universal Clamping & Locating Angle 

- Infinitely adjustable range 0-255° 

- Adjustable by scale 

- Hydromechanical locking mechanism 

- Can be combined with other system elements 

Size 475 x 100 x 100mm 

Universal Clamp (Small) 

- Smaller version of part 3007 

- No Scale 

- Connects with part number 5009 (Not included) 

Size 200 x 50 x 50mm 

Angle Stop 

- Infinitely adjustable range 

- 45° to 270° 

- No Scale 

- Connects with part number 6001 (Not included) 

Universal Protractor 

3010 Protractor Universal 

- Infinitely adjustable range 

- 0° to 180° 

- Graduated Scale 

Page 10 of 20 

Ref.20091216

Demmeler U & L Shaped Blocks Index 


Angle Extension 

- Extends Clamping & Locating angles 

- Suitable for left & Right Hand 

4000-3 Extension 300mm Angle 

4000-6 Extension for 600mm Angle 

4002-10T/600 Assembly 1m x 600mm Trestle 

4002-10T/800 1m x 800mm Trestle Assembly 

4002-20T/600 Assembly 2m x 600mm Trestle 

4002-20T/800 Assembly 2m x 800 Tresle 

4002-05 Block 500mm U-Form Spacer 

4002-10 Block 1m U-Form Spacer 

4002-15 Block 1.5m U-Form Spacer 


4002-25 Block 2.5m U-Form Spacer 


Size 300 x 100 x 90mm 

Angle Extension 

- Extends Clamping & Locating angles 

- Suitable for left & Right Hand 

Size 600 x 100 x 90mm 

U-Shaped Block Trestle 

- Weight Approx. 187kg. 

- Application: 5-sided 

- Designed for use with rail system 2003 

- Easily adjusted to give exact spacing from table 



- Weight Approx. 203kg. 

















Spacer Block U-Shaped 

- Weight 61kg 


- 3D extension as a clamping tower or used to join 

tables together. 
































Page 11 of 20 

Ref.20091216

Demmeler Stops Index 


4004 Stop Round 

4005 Stop Half Round 

- The holes in the universal stop serves as a clamp lock for all 

swing clamps, offered in the catalogue, or for mounting of toggle 

clamps with a special adaptor 

4009 Stop Universal (spring Loaded) 

- The universal stop can be located and locked on 5 -sides of the 

table's grid pattern in increments of 25mm or on angles of 45°, 90°, 

135°, & 180° 

5000 Stop Universal (Large) 

- The special shape of this universal stop allows setting of 

workpieces around all sides and also in the milled notches 

5001 Stop Universal 

5002 Stop Universal (Small) 

5003 Bar Stop 500mm 

Round Stop 

- Locates in any Ø28 hole 

- Supported by O Rings 

- Used as a stop 

Size ∅30 x 50mm 

Half Round Stop 

- Locates in any Ø28 hole 

- Supported by O Rings 

- Used as a stop 

Size 15 x 50mm 

Universal Stop (Spring Loaded) 

- Ideal for sheet metal. 

- Spring loaded action at the end of this stop locates 

material in position without clamps 

Size 225 x 50 x 25mm 

Universal Stop (Large) 

- Longer slot for additional adjustment 

- Located square with PC Bolts 

Size 250 x 50 x 25mm 

Universal Stop 

- This stop is fixed or infinitely adjustable on the 

Demmeler table and accessories 

- One stop creates 2 location points 

Size 225 x 50 x 25mm 

Universal Stop (Small) 

- This small universal stop is used in areas where 

space is tight 

- function as 5001, not infinitely adjustable 

- One stop creates 2 location points 

Size 100 x 50 x 25mm 

Stop Bar 

- Function as 5001, but longer 

- Large dimensions, higher stability, more clamping 

and fixturing possibilities as 5001 and 5002 

Size 500 x 100 x 25mm 

Example: Typical Demmeler Fixturing 

set-up of RHS frame using various stops 

Page 12 of 20 

Ref.20091216

Demmeler PC Bolts Index 

D28 Bolts Specifications 

- Approved tightening torque Max. 70 Nm. 

- Clamping force approx 5 tonne 

- Shear force approx 25 tonne 

- (PC = Positioning & Clamping) 

Clamping in a 

tight space 

with three PC 

Bolts. 

All bolts are self centering, made of high quality hardened material with double O-Rings that 

prevents the bolt turning during tightening plus cleans the clamping hole on insertion. 

Image Item Code Description Technical Description 

5009 Bolt Positioning & Clamping Flat Head 

PC Bolt (Flat Head Type) 

- 5 ball design for greater surface area contact 

when clamping 

- Use with part 3008 

- Tighten using 10mm hex wrench 

- Short version 

5009L 

Bolt Positioning & Clamping (Long) Flat Head 

PC Bolt (Flat Head Type) 


when clamping 

- Use with part 3008 

- Tighten using 10mm hex wrench 

- Long version 

6000 Bolt Positioning & Clamping Tapered Head 

6000L 

6001 Bolt PC 

Bolt Positioning & Clamping (Long) Tapered Head 

Double Hex 

on 6001 & 6002 

Bolts 

6002 Bolt Positioning & Clamping (Long) 

PC Bolt (Tapered Head) 


when clamping 

- Head sits flush with hole 

- Similar to part 6001 

- Short version 

PC Bolt (Tapered Head) 


when clamping 

- Head sits flush with hole 

- Similar to part 6002 

- Long version 

PC Bolt (Std.) 


when clamping 

- used to connect angles, spacer blocks and 

stops etc. to the Demmeler table and to join 


- Ground for highest precision 

PC Bolt (Std. Long Version) 


when clamping 

- Functions as 6001 

- For clamping two fixturing tools together one 

on top of the other 

Connecting Bolt 

6003 Connection Bolt 

- Used for long term connection 

- Clamps flush 

6004 PC Toggle Bolt 

Toggle PC Bolt 


when clamping 

- Functions as 6001 except uses fast toggle 

lever for speedy connection 

Page 13 of 20 

Ref.20091216

Demmeler Clamp Index 


7001-HANDLE-BESSEY 

Handle Bessey 

Handle Bessey 

- Overall length of 235mm, 75mm of thread 

- Graphite impregnated thread 

- Ø35 Wooden handle 

- Quick attach knob suits all foot pads. 

7001-HANDLE-T 

7001 

7001-DELRIN 

7001-STAINLESS 

7001-T 

7001-T-DELRIN 

7001-T-STAINLESS 

7001-TOG 

7001-TOG-DELRIN 

7001-TOG-STAINLESS 

Handle Tee 

Clamp Compensating Swing (Adjustable) 150mm- 

200mm 


200mm 


200mm 

Clamp T-Handle Compensating Swing (Adjustable) 

150mm-200mm 


150mm-200mm 


150mm-200mm 

Clamp Togggle Handle Compensating Swing 

(Adjustable) 150mm-200mm 

Clamp Toggle Handle Compensating Swing 


Clamp Toggle Handle Compensating Swing 


7002 Clamp Compensating Swing (Fixed) 150mm-200mm 

7002-DELRIN 


7002-T 

7002-T-DELRIN 


7002-TOG 



7003 Ring Stop 

Clamp Compensating Swing (Fixed) 150mm-200mm 

Clamp Compensating Swing (Fixed) 150mm-200mm 

Clamp T-Handle Compensating Swing (Fixed) 

150mm-200mm 


150mm-200mm 


150mm-200mm 


150mm-200mm 


150mm-200mm 


150mm-200mm 

Handle Tee 

- Overall length of 130mm, 100mm of thread 

- Graphite impregnated thread 

- Sliding Tee handle for extra tightening 

- Quick attach knob suits all foot pads. 

Compensating Swing Clamp/Adjustable 

- Spring loaded 

- Standard clamp height 300mm 

- Clamping tube changeable to other lengths 

(Max. 950mm clamp height) 

- Clamping stroke 60mm 

- Wooden Handle 

Reach - Adjustable 

150mm - 200mm 






- Tee Handle 


150mm - 200mm 






- Toggle Clamp Handle 

- Clamping Stroke 5mm 


150mm - 200mm 

Compensating Swing Clamp/Fixed 

Clamping Tube 






150mm - 200mm 


Clamping Tube 




- Tee Handle 


150mm - 200mm 


Clamping Tube 




- Toggle Clamp Handle 


150mm - 200mm 

Stop Ring 

- Fits all clamping tubes 

- For setting the height of swing clamps 

- Included with each swing clamp 

Size Diameter 28 x 10mm 

Page 14 of 20 

Ref.20091216



7004/1000 Tube Clamping (1000mm) 

7006 Sleeve Extension 

Clamping Tube/Cut-to-Length 

- Fits all system bores 

- Precision Tube 

SIZE 1000mm 

Extension Sleeve 

- Used as a connector between two clamping 

tubes 

Size Diameter 28 x 34mm Length 100mm 

7007 Clamp Toggle 

7007-DELRIN Clamp Toggle (Delrin) 

7007-STAINLESS Clamp Toggle (Stainless Steel) 

7008 Clamp Horizontal Swing 

7008-DELRIN 


Clamp Horizontal Swing (Delrin Foot) 

Clamp Horizontal Swing (Stainless Foot) 

7008-T Clamp T-Handle Horizontal Swing 

7008-T-DELRIN 


Clamp T-Handle Horizontal Swing (Delrin Foot) 

Clamp T-Handle Horizontal Swing (Stainless Foot) 

7009 Clamp Angled (45 deg.) 

7009-DELRIN 


Clamp Angled (45 deg.) (Delrin Foot) 

Clamp Angled (45 deg.)(Stainless Foot) 

7009-T Clamp T-Handle Angled (45 deg.) 

7009-T-DELRIN 


Clamp T-Handle Angled (45 deg.) (Delrin Foot) 

Clamp T-Handle Angled (45 deg.)(Stainless Foot) 

Toggle Clamp 

- Functions as screw clamp with the exception 

of fast toggle lever for speed clamping 


Horizontal Swing Clamp 90° 

- Orientation 90° to system bore 


- Using 180° quick action joint with detent, 

clamping range is 120mm 

- Max. Height 170mm 

- Height adjustment with stop ring 

- Insertion of a clamping bridge is possible 


Envlope Size 260 x230mm 

Horizontal Swing Clamp 90° 



- Using 180° quick action joint with detent, 

clamping range is 120mm 




- Tee Handle Envlope Size 260 x230mm 

Angled Swing Clamp 45° 



- Horizontal movement of 80mm 





Envlope Size 300 x 370mm 





- Max. height 160mm 

- Height adjustable with stop ring 


- Tee Handle 


7009-TOG 



Clamp Toggle-Handle Angled (45 deg.) 

Clamp Toggle-Handle Angled (45 deg.) (Delrin Foot) 

Clamp Toggle-Handle Angled (45 deg.)(Stainless Foot) 






- Height adjustable with stop ring 



7010 Clamp Horizontal (No Swivel) 

7010-DELRIN 


Clamp Horizontal (No Swivel)(Delrin Foot) 

Clamp Horizontal (No Swivel)(Stainless Foot) 

Horizontal Clamp 

(No Swing) 

- Clamps flush to table 



- 2 handle types. Wooden & "T" 

Page 15 of 20 

Ref.20091216



7010-T Clamp T-Handle Horizontal (No Swivel) 

Horizontal Clamp 

7010-T-DELRIN 


Clamp T-Handle Horizontal (No Swivel) (Delrin Foot) 

Clamp T-Handle Horizontal (No Swivel) (Stainless Foot) 

(No Swing) 

- Clamps flush to table 



- 2 handle types. Wooden & "T" 

7011 Pad Clamp (Mild Steel) 

Clamp Pad (Blackened Steel) 

- Removable from clamp to clamp 

7012 Pad Clamp (Stainless Steel) 

Clamp Pad (Stainless Steel) 


7013 Pad Clamp (Delrin) 

Clamp Pad (Delrin) 


7014 Pad Clamp Steel Square 

7015 Clamp Foot 

7015-DELRIN Clamp Foot (Delrin Foot) 

7015-STAINLESS Clamp Foot (Stainless Foot) 

7015-T Clamp T-Handle Foot 

7015-T-DELRIN Clamp T-Handle Foot (Delrin Foot) 

7015-T-STAINLESS Clamp T-Handle Foot (Stainless Foot) 

7016 Clamp Swing (180 deg) 

7016-DELRIN 


Clamp Swing (180 deg)(Delrin Foot) 

Clamp Swing (180 deg)(Stainless Foot) 

7016-T Clamp T-Handle Swing (180 deg) 

7016-T-DELRIN 


7016-TOG 



Clamp T-Handle Swing (180 deg)(Delrin Foot) 

Clamp T-Handle Swing (180 deg)(Stainless Foot) 

Clamp Toggle-Handle Swing (180 deg) 

Clamp Toggle-Handle Swing (180 deg)(Delrin Foot) 

Clamp Toggle-Handle Swing (180 deg)(Stainless Foot) 

7018 Tube Extension 

Clamp Pad (Steel with flats) 


Clamp Foot (Adjustable) 

- Use as a positioning or clamping tool 

- The clamp nut is designed fit into tables, 

plates, angles & blocks with Ø28 holes. Adjust 

the distance by winding handle 


- Locking nut included 

Clamp T-Handle Foot (Adjustable) 

- Use as a positioning or clamping tool 

- The clamp nut is designed fit into tables, 

plates, angles & blocks with Ø28 holes. Adjust 

the distance by winding handle 

- Also used as clamping tool 

- Tee Handle 

- Locking nut included 

Swing Clamp 180° 

- The most economical swing clamp 

- Orientation to system bore 



- Max. height of 140mm with a stop ring 



Clamp T-Handle Swing 180° 







- Tee Handle 

Clamp Toggle-Handle Swing 180° 







- Toggle Handle 

Tube Extension 

- Insertion of clamping handle is possible 


Page 16 of 20 

Ref.20091216



7020 Clamp Double Attachment 

7020-DELRIN 


Clamp Double Attachment (Delrin Feet) 

Clamp Double Attachment (Stainless Feet) 

8001 Clamp Vertical Toggle 

8002 Clamp Horizontal Toggle 

8003 Clamp Vertical Speed 

8004 Adaptor 

Double Clamp Attachment 


- Clamps two positions at once 

- Pads Included 

- Pad material choices are Steel, Delrin and 

Stainless Steel 

Vertical Toggle Clamp 

- 90° of stroke 

- With adaptor & tapered locking screw 

- For direct mounting or adjustable using the 

universal stop 

Horizontal Toggle Clamp 

- 30mm stroke 

- With adaptor and tapered locking screw 

- For direct mounting or adjustable using the 

universal stop 

Speed Clamp 

- On a Ø28 clamping tube with flange and 

tapered locking screw for direct mounting in 

any clamping hole 

- Range from 50 to 300mm 

- Adjustable using the universal stop 

Adaptor 360° for toggle & speed clamps 

with tapered locking screw 

- Range 360° circular 

- Suitable for all holes & toggle/speed clamp 


8005 Adaptor 

Adaptor with tapered locking screw 

- Suitable for all holes toggle/speed clamps 


Demmeler Accessory Cart 

Shown holding a range of 

accessories 

Front View 

Rear View

Demmeler V-Block Index 


9001 Set Spacer 

9003 Block Dia 60mm "V" 

9003H Block Dia 60mm Adjustable "V" 

9004 Block V Dia 120mm 

Spacer Set - 10 Parts 

- Spacer sizes include 1, 2, 3, 4, 5, 20, 40 & 50mm thick 

- Fits all D28 holes 

- Held in place shaft spacer by O-Rings 

V-Block 

- Diameter 60mm with tapered locking screw 

- Fits all D28 holes for direct mounting or adjustable using the universal stop 

5001, stop bar etc. 

- Max holding diameter = 100mm 

V-Block Dia 60mm (adjustable) 

- Bolts to any spacer set 9001 (not included) 




V-Block Dia 120mm 

- Diameter 120mm with tapered locking screw 



- Other angles on request. 


9004H 

Block Dia 120mm adjustable "V" 

V-Block Dia 120mm (adjustable) 

- Bolts to any spacer set 9001 

- Spacer set not included 


9005 Adjuster "V" Block 

V-Block & Spacer Adjuster 

- Fine adjustment for V-Blocks & spacer sets 

9007 Stop 2D Side 

Slide Stop 

- C/W Clamping Bolt 

- For use on 2D tables 

Example: Large scale Demmeler Fixturing set-up 

of Pipe Assembly using various V-Blocks 

Page 18 of 20 

Ref.20091216

Accessories Index 


9008 Earth Magnetic 

10001 Shackle Transport 

10002 Brush 

10003 Brush Boiler 

11001 Cart Accessory 

Magnetic Earth 

- Provides strong, positive electrical connection to job or table 

- Clamp force approx 40kg on 6mm 

- Up to 800 amps 

- Copper stud contact 

Transport Shackle 

- Mount to centre of tables, rails, blocks & trestles for lifting & positioning 

- With 4 holes, clamped with 2 PC-bolts 

* Holes at 100mm centres 

* Or diagonal use 

Brush 

- For cleaning Demmeler holes 

- Hand held 

Mechanical Brush 

- For cleaning Demmeler holes 

- Machined held 

Accessory Cart 

- Houses Demmeler components 

- Low centre if gravity 

- Mounted on wheels 

- Powder coated finish 

11002 Bottle Spray (1 litre) 

Spray Bottle 

- 1 Litre capacity 

- Durable 

- Specially designed long lasting seal to tolerate CM3 & CM4 

CM3 

Antispatter 

Spatter Guard 

Antispatter - Spatter Guard 

- Spatter guard & rust preventative 

- Pre-welding spray to prevent adhesion of spatter 

CM4 

Degreaser 

Organic Natural Cleaner 

Degreaser - Organic Natural Cleaner 

- Used for the removal of Spatter guard & rust preventative 

"Setting the Standard in Modular Fixturing Solutions" 

Copyright © 2009 C & M Leussink Engineering Pty Ltd. All rights reserved 

Page 19 of 20 

Ref.20091216

Services & Purchasing Options 

1 

Design & Quotation Service 

3 Easy Steps 

ACIS 

AutoCAD 

DXF 

IGES 

Parasolids 

Step 

SolidWorks 

Send us a drawing, part or CAD 

model that you'd like to see 

fixtured with Demmeler. 

To get a clearer picture of 

exactly how much a Modular 

Fixturing System will cost or 

even if it will work for your 

parts, you should consider 

taking advantage of our 

Custom Design & Quotes 

service. Send us your solid 

models or drawings and we 

can suggest what 

components would best suit 

your part. ** 

3 

A list of components used will accompany the 

proposed fixtures to give you an idea of costs. 

Our applications engineers will 

convert your 2-D drawings into a 3-D 

Solid Model if necessary so we can 

get started with a fixture design. 

Using our CAD library of our tooling 

components, we'll design a fixture or two 

showing your part located and clamped, 

ready for welding. 

2 

Rent Try or Buy 

A rental contract must be completed before the shipment is made – please inquire. 

If a package is purchased, 100% of deposit and 50% of monthly payments will be applied against purchase. 

After rental term, customer may continue to rent monthly, purchase or return package. 

General Terms: 

Refundable deposit and 1st months rent due with placement of order. 

Customer will be responsible for freight charges both outbound and returning. 

All unused components may be exchanged for others (of equal value) during the rental period. 

All prices quoted are exclusive of GST. 

Payments can be made with cheque, direct deposit or credit card. 

Credit will need to be established before shipment is made. 

Contact us now and see how we can help 

you build your products faster, smarter 

and with greater accuracy. 

**Conditions Apply

Demmeler Parts Calalogue - Leussink Engineering

Create successful ePaper yourself

Delete template?

Save as template?