BISCO DENTAL PRODUCTS CANADA - dentes.sk
BISCO DENTAL PRODUCTS CANADA - dentes.sk
BISCO DENTAL PRODUCTS CANADA - dentes.sk
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
VPS IMPRESSION MATERIALS<br />
FREEALGIN ®<br />
PERFECT IMPRESSIONS<br />
ZHERMACK presents the new alginate alternative; a<br />
thixotropic addition silicone with an exotic flavour. FREEALGIN<br />
is ideal for preliminary and orthodontic impressions, removable<br />
prostheses, antagonists and temporaries.<br />
Ordering Information<br />
• FREEALGIN: 2 x 50ml cartridges (Base + Catalyst) + 4 lilac mix. tips<br />
• FREEALGIN MAXI: 2 x 380ml cartridges (Base + Catalyst) 15 dynamic mixers<br />
+ 2 bayonet rings<br />
• FREEALGIN MAXI: 6 x 380ml cartridges (Base + Catalyst) 15 dynamic mixers<br />
+ 2 bayonet rings<br />
FREEALGIN, SPEED<br />
• Automatic mixing<br />
• No instruments to clean (bowl, spatula)<br />
• Fast setting silicone<br />
• No dosing required<br />
FREEALGIN, SAFETY<br />
• High dimensional stability<br />
• No time limit for casting the impression<br />
• Safe disinfection<br />
• Possibility of multiple castings of the model<br />
• Constant consistency and thixotropic nature<br />
• High tear resistance even in thin sections<br />
FREEALGIN, PLEASANT<br />
• Exotic mangustan fruit fl avour<br />
• Thixotropic. Does not run during impression<br />
setting<br />
• Matt colour allows easy reading of the<br />
impression<br />
CLINICAL TECHNIQUE<br />
Initial case<br />
Creation of the matrix with ELITE<br />
GLASS: leave at least 2 mm of<br />
silicone around teeth*<br />
Make sure there are no defects in the<br />
area involved in the impression<br />
ELITE ® GLASS<br />
Preparation of the veneer Treatment of the surface** Application of the composite, starting<br />
from the incisor zone and moving<br />
towards the cervical edge<br />
Addition silicone (VPS) for making a transparent matrix directly<br />
in the patient’s mouth. Subsequently, light-curing materials (eg<br />
composite) are applied into the matrix and re-seated in the mouth<br />
to be light-cured through the transparent matrix. (ideal for making<br />
temporary veneers).<br />
Repositioning the matrix made<br />
with ELITE GLASS in the mouth,<br />
making sure not to leave gaps<br />
between the matrix and the teeth.<br />
Photopolymerise through the<br />
matrix**<br />
Finishing the composite: remove the<br />
excess material and polish**<br />
End result<br />
• Completely transparent matrix - allows a variety of<br />
cosmetic dental problems to be resolved quickly with<br />
excellent aesthetic results<br />
• Reduces the non-polymerised surface layer of the<br />
composites due to the inhibition by oxygen<br />
Ordering Information<br />
• ELITE GLASS (2 x 50ml cartridges with 12 mixing tips)<br />
*Important: remember to trim the level of material so that, at least 2mm of silicone remains around the teeth<br />
**Follow the instructions provided by the manufacturer of the composite<br />
1-800-667-8811 / www.biscocanada.com 53