BISCO DENTAL PRODUCTS CANADA - dentes.sk

More documents

Recommendations

Info

COMPOSITE RESTORATIVES BISFIL 2B Flowable Self-Cured Composite Specifically designed to be used as the base increment in a Class I or II restoration, BISFIL 2B can be used to bulk fill a cavity prep to the dento-enamel junction without worrying about shrinkage stress or under-cured material. BISFIL 2B is now available in convenient auto-mix dual-syringes which provide simultaneous mixing, dispensing and delivery. FEATURES Features BENEFITS & Benefits Rapid setting Quick high Eliminates gloss surface time saves spent chair with incremental time placement of light-cured materials Self-cured Prevents microbial Does not attack, cause shrinkage stains and stress increases like light-cured wear resistance composites during Can last up curing to 5 years process, on and anteriors maintains excellent marginal integrity Low viscosity Reduces the Ideal number flow into of finishing undercut products areas needed in the dental operatory Radiopaque Easily identified on radiographs At Room Temperature (22°C/72°F): Working Time: Setting Time: Individual Syringes Minimum 2 min. 30 sec. Minimum 4 min. 30 sec. Dual - Syringes Minimum 2 min. 15 sec. Minimum 4 min. 30 sec. Ordering Information • 2 Syr Pkg or 1 dual syr pkg (5g Base & 5g Catalyst) • 4 Syr Pkg (2 x 5g Base & 2 x 5g Catalyst) / *Also available in Shade A3 / A3.5 • 1 Dual-Syringe Dispenser BISFIL II Packable Self-Cured Posterior Composite Nothing beats BISFIL II when you want a packable material that can be used to bulk fill a cavity prep to the DEJ. BISFIL II is an incredibly efficient material to work with when you are filling 2 or more cavities in the same quadrant because you are not spending time light-curing multiple increments. It is intended for use with adhesives such as ALL-BOND 3 ® ,ALL-BOND 2 ® , ONE-STEP ® or ONE-STEP ® PLUS. FEATURES Features & Benefits BENEFITS Rapid setting Quick high gloss surface saves chair Eliminates time time spent with incremental placement Prevents microbial attack, stains of and light-cured increases materials wear resistance Self-cured Can last up to 5 years on anteriors Does not cause shrinkage stress like light-cured Reduces the number of finishing composites products needed during curing the dental process, operatory and maintains excellent marginal integrity High tensile and compressive strength Essential strength for effective posterior function High viscosity Easily packable 84% filled by weight High wear resistance Radiopaque Easily identified on radiographs At Room Temperature (22°C/72°F): Working Time: Minimum 2 min. Setting Time: Minimum 5 min. 30 sec. Ordering Information • 2 Syr Pkg (5g Base & 5g Catalyst) • 4 Syr Pkg (2 x 5g Base & 2 x 5g Catalyst) • Standard Pack (Jars: 7g Base & 7g Catalyst) • Econo Pack (Jars: 14g Base & 14g Catalyst) 18 1-800-667-8811 / www.biscocanada.com
COMPOSITE RESTORATIVES Directed Shrinkage Technique Introduced first by Dr. Takao Fusayama, and later by Drs. Raymond Bertolotti and John Kanca III, the self-cure posterior restoration technique known as the “directed contraction shrinkage technique” has provided dentists with a reliable and efficient means of achieving sensitivity-free restorations for more than 16 years. This technique suggests that in contrast to light-cured composites, BISFIL II or 2B begins curing adjacent to the naturally warmer surfaces of the dentin. Since all composites shrink upon polymerization, the net effect of the Directed Shrinkage Technique is to direct polymerization toward the tooth, improving adaptation to the preparation. In this technique, BISFIL II or 2B needs to be overlaid with a light-cured composite such as AELITE Aesthetic Enamel. Bisfil II and 2B are 2 self-cure composites offering 2 viscosities for 2 different placement techniques – pack it or flow it, the choice is yours. The contraction forces of self-cure composites is toward the tooth, maintaining the adhesive seal of the dentin, eliminating post-operative sensitivity. 1. In the following case a direct DO composite resin on the lower left second bicuspid is placed. The matrix has been placed distally. The shortened wedge is visible interproximally. 2. With the BiTine-ring in place the matrix section is stabilized at the same time as the interproximal space is effectively widened for a tight contact. The shortened wedge is not interfering with the ring. 3. UNI-ETCH ® withBAC is a semi-gel of phosphoric acid with disinfecting Benzalkonium Chloride used for “total-etch” bonding. The tooth is etched for 15 seconds and rinsed with water for 5 seconds. The surface is left visibly moist, for “wet bonding”. It is not dried out. 4. ONE-STEP ® / ONE-STEP ® PLUS is the only single-component adhesive on the market with full compatibility to chemicallycured composites. ONE-STEP ® PLUS is the filled version. The moist tooth is generously brushed with 2 layers of ONE-STEP ® adhesive. If a Microbrush, is used, which carries less adhesive, additional coats must be applied. 5. It is important to air dry correctly so the adhesive is not blown away. Start drying with the air syringe at a greater distance. Complete drying at closer distance. Total drying time is around 10 sec. 6. A correctly treated surface has typical shiny “resinous” appearance. If not, additional ONE- STEP ® coats must be applied. 7. Light-cure ONE-STEP ® for 10 seconds with a halogen or LED light (with calibrated power density). 8. With tooth surfaces bonded, the base increment of BISFIL 2B can be prepared, either using an automix tip or by handmixing on a mixing pad. Alternatively, BISFIL II may be used if a packing technique is preferred. a b 9. BISFIL 2B is placed in the deepest part of the cavity first. The cavity is filled shy of the proximal contact area. If needed, the material can be spread out using a probe. It is left to set for about 2 minutes. 13. With the R.A.P.T.O.R. bur dimples are placed mesially, distally and centrally indicating fossae. Fossae are joined so that cuspal planes and fissures are created. The carbides further refine the anatomy. 10. Once BISFIL 2B has hardened the rest of the cavity can be filled with a light-curing composite of choice e.g. AELITE Aesthetic Enamel. 14. Following finishing, the surface can be sealed with FORTIFY or BisCover surface sealant. The occlusal surface is etched with UNI-ETCH for 15 sec. Rinsed and carefully dried with an air syringe. 11. When filling the occlusal part of the cavity, the unrestricted working time of a light curing material is valuable for sculpturing. 15. <strong>BISCO</strong>VER LV is a liquid polish rendering instant high gloss to the surface, in addition to sealing it. 12. Finishing and polishing of the restoration is made easy and fast using the R.A.P.T.O.R. ® finishing system. With burs a. and b. occlusal anatomy is shaped. The carbides accentuate and polish the surface. 16. The etched, rinsed and dried surface is painted with diluted BisCover LV and cured with a halogen light for 40 sec. Dentistry and Photography courtesy of Dr. Johan O. Hultén 1-800-667-8811 / www.biscocanada.com 19
Page 1 and 2: BISCO DENTAL PRODUCTS CANADA NATION
Page 3 and 4: NEW PRODUCTS
Page 5 and 6: superclean comes standard. The pate
Page 7 and 8: Click, Mix and Apply • Minimizes
Page 9 and 10: Double Taper LIGHT-POST ILLUSION X-
Page 11 and 12: Immediate Dentin Sealing Technique*
Page 13: DENTIN ENAMEL UNIQUE BENEFITS Flexu
Page 17 and 18: ADHESIVES ALL-BOND 3 / ALL-BOND SE
Page 19 and 20: ADHESIVES ALL-BOND 3 ® The Gold St
Page 21 and 22: ADHESIVES ONE-STEP ® / ONE-STEP ®
Page 23 and 24: ADHESIVES ALL-BOND2 ® Technique Su
Page 25 and 26: DESENSITIZER DESENSITIZER BISBLOCK
Page 27 and 28: COMPOSITE RESTORATIVES COMPOSITE RE
Page 29 and 30: COMPOSITE RESTORATIVES FREE SAMPLE
Page 31: COMPOSITE RESTORATIVES ÆLITEFLO /
Page 35 and 36: CEMENTS CEMENTS CHOICE 2 Shade Stab
Page 37 and 38: CEMENTS DUO-LINK Translucent Luting
Page 39 and 40: CORE MATERIALS CORE MATERIALS Core
Page 41 and 42: CORE MATERIALS LIGHT-CORE Light-Cur
Page 43 and 44: FINISHING FINISHING R.A.P.T.O.R. ®
Page 45 and 46: ACCESSORY PRODUCTS ACCESSORY PRODUC
Page 48 and 49: TESCARA ATL TESCERAATL AQUA, THERMA
Page 50 and 51: TESCARA ATL TESCERA Fiber Reinforce
Page 52 and 53: FIBER POSTS DOUBLE TAPER LIGHT-POST
Page 54 and 55: FIBER POSTS DOUBLE TAPER LIGHT-POST
Page 56 and 57: FIBER POSTS In most cases when meta
Page 58 and 59: SECTIONAL MATRIX SYSTEMS 4 Wide tip
Page 60 and 61: BRAZED DIAMOND BURS COMPOSI-TIGHT
Page 62 and 63: VPS IMPRESSION MATERIALS COLORRISE
Page 64 and 65: VPS IMPRESSION MATERIALS TECHNICAL
Page 66 and 67: VPS IMPRESSION MATERIALS FREEALGIN
Page 68 and 69: ALGINATES FREE SAMPLE HYDROGUM 5 Ex
Page 70 and 71: IMPRESSION TRAYS HI-TRAY LIGHT DUAL
Page 72 and 73: PRODUCT INDEX BISCO DENTAL PRODUCTS

BISCO DENTAL PRODUCTS CANADA - dentes.sk

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?