SERVICE MANUAL LC-XB41 - TechEdu.com
SERVICE MANUAL LC-XB41 - TechEdu.com
SERVICE MANUAL LC-XB41 - TechEdu.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Optical Parts Disassembly<br />
, Locations and Directions<br />
When mounting or assembling the optical parts in the optical<br />
unit, the parts must be mounted in the specified location<br />
and direction as shown in figure below.<br />
No. Parts Name<br />
1 Integrator lens (OUT)<br />
2 Prism beam splitter (PBS)<br />
3 Condenser lens (OUT)<br />
4 Dichroic mirror (B)<br />
5 Dichroic mirror (G)<br />
6 Condenser lens (G)<br />
7 Relay Lens (IN)<br />
8 Mirror (R)<br />
9 Condenser lens (R)<br />
10 Condenser lens (B)<br />
11 Mirror (B)<br />
1<br />
2<br />
3<br />
Point marker is printed<br />
on this side up<br />
4<br />
Rugged surface is<br />
facing this side.<br />
Film attached side is<br />
facing this side.<br />
11<br />
10<br />
Point marker is printed<br />
on this side up<br />
5<br />
6<br />
7<br />
528<br />
527<br />
9<br />
8 8<br />
Fig.8<br />
-21-
Change language