2006 Graduate Catalog and 2005 Annual R & D Report - Sirindhorn ...
2006 Graduate Catalog and 2005 Annual R & D Report - Sirindhorn ... 2006 Graduate Catalog and 2005 Annual R & D Report - Sirindhorn ...
2005 Annual R & D Report Sirindhorn International Institute of Technology (SIIT) School of Manufacturing Systems and Mechanical Engineering 2005 Publications International Journals 1. Kuprianov, Vladimir I. (2005). Applications of a cost-based method of excess air optimization for the improvement of thermal efficiency and environmental performance of steam boilers, Renewable & Sustainable Energy Reviews, Vol. 9, No. 5, pp. 474-498. 2. Kuprianov, Vladimir I.; Watchara Permchart; and Kasama Janvijitsakul (2005). Fluidized bed combustion of pre-dried Thai bagasse, Fuel Processing Technology, Vol. 86, No. 8, pp. 849-860. 3. Luckhana Lawtrakul and Chakguy Prakasvudhisarn (2005). Correlation studies of HEPT derivatives using swarm intelligence and support vector machines, Monatshefte für Chemie / Chemical Monthly, Vol. 136, No. 9, pp. 1681-1691. 4. Navee Chiadamrong and Priyanka Kohly (2005). A comparison of the push and pull production systems at their optimal designs under the economic consideration, ASEAN Journal on Science & Technology for Development, Vol. 22, No. 4, pp. 313-330. 5. Nguyen Van Hop (2005). The tool-switching problem with magazine capacity and tool size constraints, IEEE Transactions on Systems, Man and Cybernetics, Part A, Vol. 35, No. 5, pp. 617-628. 6. Nguyen Van Hop and Mario T. Tabucanon (2005). Adaptive genetic algorithm for lot-sizing problem with selfadjustment operation rate, International Journal of Production Economics, Vol. 98, No. 2, pp.129-135. 7. Nguyen Van Hop and Ruengsak Kawtummachai (2005). Fuzzy estimation for manufacturing flexibility, International Journal of Production Research, Vol. 43, No. 17, pp. 3605-3617. 8. Passakorn Srisastra and Satha Aphornratana (2005). A circulating system for a steam jet refrigeration system, Applied Thermal Engineering, Vol. 25, Nos. 14-15, pp. 2247-2257. 9. Ruengsak Kawtummachai and Nguyen Van Hop (2005). Order allocation in a multiple-supplier environment, International Journal of Production Economics, Vols. 93-94, No. 8, pp. 231-238. 10. Surat Atthajariyakul and Thananchai Leephakpreeda (2005). Neural computing thermal comfort index for HVAC systems, Energy Conversion and Management, Vol. 46, Nos. 15-16, pp. 2553-2565. 11. Teeradej Wuttipornpun; Pisal Yenradee; Patrick Beullens; Dirk L. van Oudheusden (2005). A finite capacity material requirement planning system for a multi-stage assembly factory: goal programming approach, Industrial Engineering and Management Systems, Vol. 4, No. 1, pp. 23-35. 12. Thananchai Leephakpreeda (2005). Adaptive occupancy-based lighting control via grey prediction, Building and Environment, Vol. 40, No. 7, pp. 881-886. National Journals 1. Chumpol Monthatipkul and Pisal Yenradee (2005). Inventory/distribution plan in a one-warehouse/multi-retailer supply chain, Thammasat International Journal of Science and Technology, Vol. 10, No. 2, pp. 9-20. 2. Ketsara Kumweang and Ruengsak Kawtummachai (2005). Solving a SSCFLP in a supply chain with ACO, Suranaree Journal of Science and Technology, Vol. 12, No. 1, pp. 29-38. 3. Pawinee Suksuntornsiri and Bundit Limmeechokchai (2005). Implications of renewable energy on total CO 2 emissions in the power sector: the full-energy-chains analysis in Thailand, Songklanakarin Journal of Science and Technology, Vol. 27, No. 3, pp. 549-562. 4. Pawinee Suksuntornsiri and Bundit Limmeechokchai (2005). The PCA and lOA approaches for life-cycle analysis of greenhouse gas emissions from Thai commodities and energy consumption, Songklanakarin Journal of Science and Technology, Vol. 27, No. 1, pp. 177-189. 5. Raksit Thitipatanapong and Bundit Limmeechokchai (2005). An experimental study of the direct contact heat exchanger for ice slurry production, Thammasat International Journal of Science and Technology, Vol. 10, No. 1, pp. 57-64. 54
2005 Annual R & D Report Sirindhorn International Institute of Technology (SIIT) 6. Thananchai Leephakpreeda (2005). Design factors for "linear" ball valve: theoretical and experimental studies, Songklanakarin Journal of Science and Technology, Vol. 27, No. 2, pp. 353-361. International Conferences 1. Chakguy Prakasvudhisarn and Siwaporn Kunnapapdeelert (2005). Analysis of minimum zone torusity using swarm intelligence. In Proceedings of the 4 th Asian Conference on Industrial Automation and Robotics (ACIAR 2005) [CD-ROM], 11-13 May 2005, Bangkok, Thailand. Paper No. F-45, 6 p. 2. Chananes Akjiratikarl and Pisal Yenradee (2005). Particle swarm optimization for the single machine total tardiness problem with sequence-dependent setup time. In Proceedings of the Sixth Asia-Pacific Industrial Engineering and Management Conference (APIEMS 2005) [CD-ROM], 4-7 December 2005, Manila, Philippines. 11 p. 3. Chumpol Monthatipkul and Pisal Yenradee (2005). Safety stock allocation in a four-stage supply chain controlled by optimal production/distribution plan. In Proceedings of the First International Conference on Operations and Supply Chain Management, 15-17 December 2005, Bali, Indonesia. 7 p. 4. Karndee Prichanont; Seeronk Prichanont; and Nuanpan Buransri (2005). Improvement guidelines for sugar cane delivery systems. In Proceedings of the 35 th International Conference on Computers and Industrial Engineering [CD-ROM], 19-22 July 2005, Istanbul, Turkey. pp. 1585-1590. 5. Kasama Janvijitsakul and Vladimir I. Kuprianov (2005). Assessment of heat losses, combustion efficiency and major gaseous emissions for the co-firing of biomass fuels in a fluidized bed. In Proceedings of the Sixth International Conference on Mechanical Engineering (ICME 2005), 28-30 December 2005, Dhaka, Bangladesh. Paper No. TH-26, 6 p. 6. Kuprianov, Vladimir I. and Vicharn Tanetsakunvatana (2005). Emissions of gaseous pollutants, PM and trace elements from a 300-MW boiler unit fired with low-rank coal. In Proceedings of the Fifth Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2005), 8-11 May 2005, Wellington, New Zealand. pp. 127-132. 7. Kuprianov, Vladimir I. and Vicharn Tanetsakunvatana (2005). Emissions of major pollutants from lignite-based power generation in Thailand: Part 1. Effects of seasonal fluctuations in the fuel quality. In Proceedings of the Sixth International Conference on Mechanical Engineering (ICME 2005), 28-30 December 2005, Dhaka, Bangladesh. Paper No. TH-43, 6 p. 8. Kuprianov, Vladimir I. and Watcharee Kaewboonsong (2005). Minimizing fuel and environmental costs for a 1330-MW power plant firing fuel oil/gas. Part 1: Modeling emissions for the utility boilers. In Proceedings of the International Symposium on EcoTopia Science 2005 (ISETS05), Extended Abstracts, 8-9 August 2005, Nagoya, Japan. pp. 115-118. 9. Kuprianov, Vladimir I. and Watcharee Kaewboonsong (2005). Modeling emissions from the boiler units of a fuel oil/gas-fired power plant. In Proceedings of the Sixth International Conference on Mechanical Engineering (ICME 2005), 28-30 December 2005, Dhaka, Bangladesh. Paper No. TH-23, 5 p. 10. Kuprianov, Vladimir I.; Watchara Permchart; and Kasama Janvijitsakul (2005). Co-firing of Thai rice husk and bagasse in a conical fluidized-bed combustor. In Proceedings of the Fifth Asia Pacific Conference on Sustainable Energy and Environmental Technologies (APCSEET 2005), 8-11 May 2005, Wellington, New Zealand. pp. 80-85. 11. Navee Chiadamrong and Priyanka Kohly (2005). An integrated approach to design an U-shape man-machine manufacturing cell under economic consideration. In Proceedings of the 4 th Global Conference on Business & Economics 2005 Program [CD-ROM], 26-28 June 2005, Oxford, UK. 12 p. 12. Pasettha Saraluk and Tawiwat Veeraklaew (2005). Steady sliding stability of friction-excited systems: smallsignal linearization analysis. In Proceedings of the 4 th Asian Conference on Industrial Automation and Robotics (ACIAR 2005) [CD-ROM], 11-13 May 2005, Bangkok, Thailand. Paper No. F-62, 5 p. 13. Przybyl-Einstein, George (2005). Algorithmic and heuristic method of engineering problems solving in real-time and embedded systems. In International Conference on Heritage of Technology, 4-7 May 2005, Gdansk, Poland. pp. 255-260. 14. Przybyl-Einstein, George; Chowarit Mitsantisuk; and Suthee Chantrapunth (2005). Multifunctional robotic arm folding back on the wheel chair. In Proceedings of the 2 nd International Conference on Mechatronics (ICOM’05), 10-12 May 2005, Kuala Lumpur, Malaysia. pp. 216-223. 55
- Page 8 and 9: 2006 Graduate Catalog Sirindhorn In
- Page 10 and 11: 2006 Graduate Catalog Sirindhorn In
- Page 12 and 13: 2006 Graduate Catalog Sirindhorn In
- Page 14 and 15: 2006 Graduate Catalog Sirindhorn In
- Page 16 and 17: 2006 Graduate Catalog and 2005 Annu
- Page 18 and 19: 2006 Graduate Catalog and 2005 Annu
- Page 20 and 21: 2006 Graduate Catalog and 2005 Annu
- Page 22 and 23: 2006 Graduate Catalog and 2005 Annu
- Page 24 and 25: 2006 Graduate Catalog and 2005 Annu
- Page 26 and 27: 2006 Graduate Catalog and 2005 Annu
- Page 28 and 29: 2006 Graduate Catalog and 2005 Annu
- Page 30 and 31: 2006 Graduate Catalog and 2005 Annu
- Page 32 and 33: 2006 Graduate Catalog and 2005 Annu
- Page 34 and 35: 2006 Graduate Catalog and 2005 Annu
- Page 36 and 37: 2006 Graduate Catalog and 2005 Annu
- Page 38 and 39: 2006 Graduate Catalog and 2005 Annu
- Page 40 and 41: 2006 Graduate Catalog and 2005 Annu
- Page 42 and 43: 2006 Graduate Catalog and 2005 Annu
- Page 44 and 45: 2006 Graduate Catalog and 2005 Annu
- Page 46 and 47: 2006 Graduate Catalog and 2005 Annu
- Page 48 and 49: 2005 Annual R & D Report Sirindhorn
- Page 50 and 51: 2005 Annual R & D Report Sirindhorn
- Page 52 and 53: 2005 Annual R & D Report Sirindhorn
- Page 54 and 55: 2005 Annual R & D Report Sirindhorn
- Page 56 and 57: 2005 Annual R & D Report Sirindhorn
- Page 60 and 61: 2005 Annual R & D Report Sirindhorn
- Page 62 and 63: 2005 Annual R & D Report Sirindhorn
- Page 64 and 65: 2005 Annual R & D Report Sirindhorn
- Page 66 and 67: Access to SIIT at Bangkadi Siam Com
<strong>2005</strong> <strong>Annual</strong> R & D <strong>Report</strong><br />
<strong>Sirindhorn</strong> International Institute of Technology (SIIT)<br />
School of Manufacturing Systems <strong>and</strong><br />
Mechanical Engineering<br />
<strong>2005</strong> Publications<br />
International Journals<br />
1. Kuprianov, Vladimir I. (<strong>2005</strong>). Applications of a cost-based method of excess air optimization for the<br />
improvement of thermal efficiency <strong>and</strong> environmental performance of steam boilers, Renewable & Sustainable<br />
Energy Reviews, Vol. 9, No. 5, pp. 474-498.<br />
2. Kuprianov, Vladimir I.; Watchara Permchart; <strong>and</strong> Kasama Janvijitsakul (<strong>2005</strong>). Fluidized bed combustion of<br />
pre-dried Thai bagasse, Fuel Processing Technology, Vol. 86, No. 8, pp. 849-860.<br />
3. Luckhana Lawtrakul <strong>and</strong> Chakguy Prakasvudhisarn (<strong>2005</strong>). Correlation studies of HEPT derivatives using<br />
swarm intelligence <strong>and</strong> support vector machines, Monatshefte für Chemie / Chemical Monthly, Vol. 136, No. 9,<br />
pp. 1681-1691.<br />
4. Navee Chiadamrong <strong>and</strong> Priyanka Kohly (<strong>2005</strong>). A comparison of the push <strong>and</strong> pull production systems at<br />
their optimal designs under the economic consideration, ASEAN Journal on Science & Technology for<br />
Development, Vol. 22, No. 4, pp. 313-330.<br />
5. Nguyen Van Hop (<strong>2005</strong>). The tool-switching problem with magazine capacity <strong>and</strong> tool size constraints, IEEE<br />
Transactions on Systems, Man <strong>and</strong> Cybernetics, Part A, Vol. 35, No. 5, pp. 617-628.<br />
6. Nguyen Van Hop <strong>and</strong> Mario T. Tabucanon (<strong>2005</strong>). Adaptive genetic algorithm for lot-sizing problem with selfadjustment<br />
operation rate, International Journal of Production Economics, Vol. 98, No. 2, pp.129-135.<br />
7. Nguyen Van Hop <strong>and</strong> Ruengsak Kawtummachai (<strong>2005</strong>). Fuzzy estimation for manufacturing flexibility,<br />
International Journal of Production Research, Vol. 43, No. 17, pp. 3605-3617.<br />
8. Passakorn Srisastra <strong>and</strong> Satha Aphornratana (<strong>2005</strong>). A circulating system for a steam jet refrigeration system,<br />
Applied Thermal Engineering, Vol. 25, Nos. 14-15, pp. 2247-2257.<br />
9. Ruengsak Kawtummachai <strong>and</strong> Nguyen Van Hop (<strong>2005</strong>). Order allocation in a multiple-supplier environment,<br />
International Journal of Production Economics, Vols. 93-94, No. 8, pp. 231-238.<br />
10. Surat Atthajariyakul <strong>and</strong> Thananchai Leephakpreeda (<strong>2005</strong>). Neural computing thermal comfort index for<br />
HVAC systems, Energy Conversion <strong>and</strong> Management, Vol. 46, Nos. 15-16, pp. 2553-2565.<br />
11. Teeradej Wuttipornpun; Pisal Yenradee; Patrick Beullens; Dirk L. van Oudheusden (<strong>2005</strong>). A finite capacity<br />
material requirement planning system for a multi-stage assembly factory: goal programming approach,<br />
Industrial Engineering <strong>and</strong> Management Systems, Vol. 4, No. 1, pp. 23-35.<br />
12. Thananchai Leephakpreeda (<strong>2005</strong>). Adaptive occupancy-based lighting control via grey prediction, Building<br />
<strong>and</strong> Environment, Vol. 40, No. 7, pp. 881-886.<br />
National Journals<br />
1. Chumpol Monthatipkul <strong>and</strong> Pisal Yenradee (<strong>2005</strong>). Inventory/distribution plan in a one-warehouse/multi-retailer<br />
supply chain, Thammasat International Journal of Science <strong>and</strong> Technology, Vol. 10, No. 2, pp. 9-20.<br />
2. Ketsara Kumweang <strong>and</strong> Ruengsak Kawtummachai (<strong>2005</strong>). Solving a SSCFLP in a supply chain with ACO,<br />
Suranaree Journal of Science <strong>and</strong> Technology, Vol. 12, No. 1, pp. 29-38.<br />
3. Pawinee Suksuntornsiri <strong>and</strong> Bundit Limmeechokchai (<strong>2005</strong>). Implications of renewable energy on total CO 2<br />
emissions in the power sector: the full-energy-chains analysis in Thail<strong>and</strong>, Songklanakarin Journal of Science<br />
<strong>and</strong> Technology, Vol. 27, No. 3, pp. 549-562.<br />
4. Pawinee Suksuntornsiri <strong>and</strong> Bundit Limmeechokchai (<strong>2005</strong>). The PCA <strong>and</strong> lOA approaches for life-cycle<br />
analysis of greenhouse gas emissions from Thai commodities <strong>and</strong> energy consumption, Songklanakarin<br />
Journal of Science <strong>and</strong> Technology, Vol. 27, No. 1, pp. 177-189.<br />
5. Raksit Thitipatanapong <strong>and</strong> Bundit Limmeechokchai (<strong>2005</strong>). An experimental study of the direct contact heat<br />
exchanger for ice slurry production, Thammasat International Journal of Science <strong>and</strong> Technology, Vol. 10, No.<br />
1, pp. 57-64.<br />
54