Catalog - Inolec

Mowing heads
Threading the nylon line on
AUTOCUT ® heads
(C models)
TrimCut TM
head
A new nylon line can be pulled in
from the outside without opening
the mowing head. Insert one or two
nylon lines into the mount ing hole
and then coil the lines by turn ing
them. Pictures illustrate AUTOCUT ®
C 5-2.
Double line, for cutting and
thinning. The nylon line is
adjusted by hand.
PolyCut TM
head
Universal cutting tool for
thinning and working on
large areas. With 3 pivotable
thermoplastic blades.
FixCut TM head 5-2 4006 710 2130
FixCut TM head 25-2 4002 710 2158
Simple head, double line for cutting and
thinning. Precut nylon lines are inserted by
hand. For all nylon lines up to 3.3 mm.
FixCut TM 5-2 for FS 38, FS 40, FS 45
FixCut TM 25-2 for FS 55, FS 56, FS 70, FS 80,
FS 85, FS 90, FS 100, FS 110, FS 120, FS 130,
FS 200, FS 250.
Metal
blade
Steel, with 8 cutters. For
cutting thick dry weeds and
reeds.
Circular saw
blade,
scratcher tooth
Special steel tool for
brushcutters from the middle
range upwards. For gnarled
bushes and thin tree trunks.
AutoCut ® head C 5-2 4006 710 2106
AutoCut ® head C 25-2 4002 710 2196
Semi-automatic head, double line for cutting and
thinning. Greater convenience when refilling
with nylon line.
AutoCut ® C 5-2 for FS 38, FS 40, FS 40 C,
FS 45, FS 46, FS 50
AutoCut ® C 25-2 for FS 55, FS 56, FS 70,
FS 80, FS 85, FS 90, FS 100, FS 110, FS 130,
FS 200, FS 250.
41