Catalog - Inolec

Low-wear saw chains
STIHL saw chains are characterized by unrivalled technology and manufacturing quality: cutters of highalloyed
chrome-nickel steel, finely machined holes in the links and hardened rivets. When combined
with the STIHL Ematic TM System and the wear-reducing STIHL Oilomatic ® system, a STIHL chain saw
is guaranteed economical use as well as a long service life.
The right choice of chain is essential for economical chain saw use. STIHL supplies a wide range of
chains ideal for every application, for every performance class and for every make of chain saw. All
chains are characterized by their robust, first-class quality.
The STIHL Ematic System
Compared to conventional bars without Ematic, the STIHL
Ematic system reduces the consumption of chain lubricant
by up to 50 %, depending on the type of wood and
the cutting attachment used. This system comprises a
STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic
saw chain and a variable-flow or reduced-flow oil pump.
Virtually every drop of chain lubricant is delivered to
exactly the right spot.
The STIHL Oilomatic lubrication system*
This system reduces friction and wear and consequently
extends the service life of the cutting attachment. Narrow
oil channels in the saw chain links funnel oil directly into
the rivets and treads of the cutting teeth. Several recesses
in which chain oil can collect are also stamped into both
ends of the drive links. This allows better distribution of
the oil over the sliding surfaces of the guide bars.
STIHL Cutting Attachment Combinations
for STIHL chain saws below 80 cm 3 displacement as
complying with CSA Standard Z62.3-2004.
Chain Saw
Model
STIHL MS 170, MS 171
MS 180 C, MS 181 C
STIHL MS 211 DURO
STIHL MS 192 T,
MS 192 C-E
STIHL MS 200 T,
MS 200
STIHL MS 230,
MS 250, MS 250 C
STIHL MS 261
STIHL MS 271,
MS 290, MS 291 C-BE
STIHL MS 391
STIHL MS 362 C-Q,
MS 362
STIHL MS 441,
MS 441 C-M, MS 460
STIHL MSE 140 C-BQ
STIHL MSE 180 C-BQ
STIHL MSE 220 C-Q
26
Pitch 3/8”P 3/8”P 3/8”P 3/8”P 0.325” 0.325” 0.325” 3/8” 3/8” 3/8” 3/8”P 3/8”P 3/8”
Guide Bar Length* 12”, 14” 12”, 14” 12”, 14” 12”, 14” 14”, 16”, 16”, 18”, 16”, 18”, 16”, 18”, 16”, 18”, 16”, 18”, 12”, 14”, 12”, 14”, 16”, 18”,
16” 16” 16” 16” 18” 20” 20” 20” 20” 20” 16” 16” 20”
Guide Bar 7 7 7 9 11 12 12 11 11 11 7 9 11
Sprocket Teeth 9
Chain complying 61 PMMC3 63 PD3 61 PMMC3 63 PMC3 23 RSC, 23 RSC, 23 RSC, 33 RSC, 33 RSC, 33 RSC, 61 PMMC3 61 PMMC3 33 RSC3
with CSA-Standard 23 RMC 23 RMC 23 RMC 33 RMC 33 RMC 33 RMC 63 PMC3
Type A
Chain complying 61 PMMC3 63 PD3 61 PMMC3 63 PMC3 23 RMC3 23 RMC3 23 RMC3 33 RSC3 33 RSC3 33 RSC3 63 PMC3 63 PMC3 33 RSC3
with CSA-Standard 63 PMC3 61 PMMC3
Type C (Low
Kickback Chain)
Guide bar lengths and saw chain designations in bold type are standard cutting attachments. These replacement saw chains meet the kickback performance requirements
for Types A and C reduced and low-kickback saw chains of CSA-Z62.3-2004 when tested on a representative sample of chain saws.
* guide bar length; depending on power head type, the effective cutting length can vary up to an inch.