GE863-QUAD / PY Software User Guide
GE863-QUAD / PY Software User Guide GE863-QUAD / PY Software User Guide
GE863-QUAD / PY Software User Guide 1vv0300746 Rev. 1 - 23/10/06 - Now you might want to look for the entries with the name starting with: "FAUSTO" but no record contains this name: command: AT+CPBF="FAUSTO" response: +CME ERROR: 22 or if extended error codes are disabled simply response: ERROR 3.1.3 Phonebook entry read by Index As first thing, you must select the desired storage as active (see par.3.1.1.1). Then: • send command AT+CPBR= where: is the index number of the desired PB record to be read. • wait for response in the format: +CPBR= ,"",,"" OK where: is the record number on the PB; is the phone number; is the type of number: 145 – international numbering scheme 129 – national numbering scheme is the alphanumeric name associated with the number. or in the case the index number does not correspond to a written record: +CME ERROR: 22 or simply ERROR. For example: 1- Let's assume you want to select the "SM" normal phonebook for operations, command: AT+CPBS="SM" response OK - Now you might want to look for the entry at the position index = 7 command: Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 38 of 117
AT+CPBR=7 the response may look like: +CPBR= 7,"+39404192369",145,"Fabio" GE863-QUAD / PY Software User Guide 1vv0300746 Rev. 1 - 23/10/06 OK - Now you might want to look for the entries at the positions from 7 to 9 and for example the position at index 8 is empty command: AT+CPBR=7,9 the response may look like: +CPBR= 7,"+39404192369",145,"Fabio" +CPBR= 9,"0404192111",129,"Fabrizio" OK 3.1.4 Phonebook entry Write As first thing, you must select the desired storage as active (see par.3.1.1.1). Then: • send command AT+CPBW=,,, where: is the index number of the desired PB record to be written (may be omitted if any empty record number can be used). is the phone number; is the type of number: 145 – international numbering scheme (contains the character "+") 129 – national numbering scheme is the alphanumeric name associated with the number. • wait for response: Response Reason Action OK Record has been successfully Proceed ahead written ERROR some error occurred Enable extended result codes (see par. 2.5.2.1), and retry. +CME ERROR: 10 SIM not present Check SIM or require SIM insertion and repeat from par. 2.5.2.2 +CMS ERROR: 310 SIM not present Check SIM or require SIM insertion and repeat from par. 2.5.2.2 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 39 of 117
- Page 1 and 2: GE863-QUAD / PY Software User Guide
- Page 3 and 4: GE863-QUAD / PY Software User Guide
- Page 5 and 6: GE863-QUAD / PY Software User Guide
- Page 7 and 8: GE863-QUAD / PY Software User Guide
- Page 9 and 10: GE863-QUAD / PY Software User Guide
- Page 11 and 12: GE863-QUAD / PY Software User Guide
- Page 13 and 14: GE863-QUAD / PY Software User Guide
- Page 15 and 16: GE863-QUAD / PY Software User Guide
- Page 17 and 18: 2.5.2.3 Provide SIM PIN (only if re
- Page 19 and 20: GE863-QUAD / PY Software User Guide
- Page 21 and 22: GE863-QUAD / PY Software User Guide
- Page 23 and 24: GE863-QUAD / PY Software User Guide
- Page 25 and 26: For example: 1 - Let's assume that
- Page 27 and 28: GE863-QUAD / PY Software User Guide
- Page 29 and 30: GE863-QUAD / PY Software User Guide
- Page 31 and 32: GE863-QUAD / PY Software User Guide
- Page 33 and 34: GE863-QUAD / PY Software User Guide
- Page 35 and 36: GE863-QUAD / PY Software User Guide
- Page 37: GE863-QUAD / PY Software User Guide
- Page 41 and 42: 3.1.5 Phonebook entry Delete As fir
- Page 43 and 44: GE863-QUAD / PY Software User Guide
- Page 45 and 46: 3.2.1.1 Set the extended incoming c
- Page 47 and 48: GE863-QUAD / PY Software User Guide
- Page 49 and 50: GE863-QUAD / PY Software User Guide
- Page 51 and 52: GE863-QUAD / PY Software User Guide
- Page 53 and 54: GE863-QUAD / PY Software User Guide
- Page 55 and 56: GE863-QUAD / PY Software User Guide
- Page 57 and 58: GE863-QUAD / PY Software User Guide
- Page 59 and 60: GE863-QUAD / PY Software User Guide
- Page 61 and 62: • wait for OK GE863-QUAD / PY Sof
- Page 63 and 64: - Data Coding Scheme - page number
- Page 65 and 66: GE863-QUAD / PY Software User Guide
- Page 67 and 68: GE863-QUAD / PY Software User Guide
- Page 69 and 70: GE863-QUAD / PY Software User Guide
- Page 71 and 72: GE863-QUAD / PY Software User Guide
- Page 73 and 74: GE863-QUAD / PY Software User Guide
- Page 75 and 76: GE863-QUAD / PY Software User Guide
- Page 77 and 78: GE863-QUAD / PY Software User Guide
- Page 79 and 80: GE863-QUAD / PY Software User Guide
- Page 81 and 82: GE863-QUAD / PY Software User Guide
- Page 83 and 84: GE863-QUAD / PY Software User Guide
- Page 85 and 86: GE863-QUAD / PY Software User Guide
- Page 87 and 88: GE863-QUAD / PY Software User Guide
<strong>GE863</strong>-<strong>QUAD</strong> / <strong>PY</strong> <strong>Software</strong> <strong>User</strong> <strong>Guide</strong><br />
1vv0300746 Rev. 1 - 23/10/06<br />
- Now you might want to look for the entries with the name starting with: "FAUSTO" but no record<br />
contains this name:<br />
command:<br />
AT+CPBF="FAUSTO"<br />
response:<br />
+CME ERROR: 22<br />
or if extended error codes are disabled simply<br />
response:<br />
ERROR<br />
3.1.3 Phonebook entry read by Index<br />
As first thing, you must select the desired storage as active (see par.3.1.1.1). Then:<br />
• send command AT+CPBR=<br />
where:<br />
is the index number of the desired PB record to be read.<br />
• wait for response in the format:<br />
+CPBR= ,"",,""<br />
OK<br />
where:<br />
is the record number on the PB;<br />
is the phone number;<br />
is the type of number:<br />
145 – international numbering scheme<br />
129 – national numbering scheme<br />
is the alphanumeric name associated with the number.<br />
or in the case the index number does not correspond to a written record:<br />
+CME ERROR: 22 or simply ERROR.<br />
For example:<br />
1- Let's assume you want to select the "SM" normal phonebook for operations,<br />
command:<br />
AT+CPBS="SM"<br />
response<br />
OK<br />
- Now you might want to look for the entry at the position index = 7<br />
command:<br />
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 38 of 117