2 0 1 3 P R O D U C T G U I D E VIRACON PRODUCT GUIDE 2013 ...

SILK-SCREEN
orientation
Pattern placement, aka orientation, must also be considered when specifying silk-screened glass and should be included in
the drawings if you are using a line pattern or for all other patterns if a specific orientation is required.
standard orientation
DOT PATTERNS
The dot pattern starts at the base dimension and runs off
the edges of the glass. Partial dot/holes are acceptable with
standard dot pattern orientation.
LINE PATTERNS
The dot pattern is vertical or horizontal and starts with
either a line or space.
When a line pattern is specified, answers to the following
questions should be included in the specifications:
1. Will the lines be vertical or horizontal
2. Which edge will the pattern start on
3. Will the pattern start with a line or space
DESIGN - PLUS ORIENTATION
A Viraspan Design pattern with requirements beyond standard orientation.
i.e. Begin
pattern 1” from
bottom edge.
i.e. Pattern
on bottom half
of lite only.
i.e. Line pattern
centered on
center line with
pattern running
off the edges.
VIRACON // COMPONENTS & ENHANCEMENTS
023