2 0 1 3 P R O D U C T G U I D E VIRACON PRODUCT GUIDE 2013 ...
2 0 1 3 P R O D U C T G U I D E VIRACON PRODUCT GUIDE 2013 ...
2 0 1 3 P R O D U C T G U I D E VIRACON PRODUCT GUIDE 2013 ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Specification Example<br />
PART 3 – EXECUTION<br />
3.1 EXAMINATION<br />
A. Verification of Conditions:<br />
1. Verify prepared openings for glazing are correctly sized and within tolerance. Verify that the minimum required<br />
face and edge clearances are being followed.<br />
2. Verify that a functioning weep system is present.<br />
3. Do not proceed with glazing until unsatisfactory conditions have been corrected.<br />
3.2 PREPARATION<br />
A. Surface Preparation: Immediately before glazing, clean glazing channels and other framing members receiving<br />
glass. Remove coatings not firmly bonded to substrates.<br />
b. Demolition / Removal: Remove and replace glass that is broken, chipped, cracked or damaged in any way.<br />
3.3 INSTALLATION<br />
A. Install products using the recommendations of manufacturers of glass, sealants, gaskets and other glazing<br />
materials including those in the GANA Glazing Manual except where more stringent requirements are indicated.<br />
b. Prevent glass from contact with contaminating substances that result from construction operations such as weld<br />
splatter, fire-safing or plastering.<br />
3.4 CLEANING<br />
A. Clean excess sealant or compound from glass and framing members immediately after application using solvents<br />
or cleaners recommended by manufacturers.<br />
Project Name, Location and Number<br />
Issue Date: mm/dd/yyyy<br />
08 80 00 Glazing - Page Number<br />
<strong>VIRACON</strong> // RESOURCES 123
Change language