Sensys Stud Trial - Sensys Networks
Sensys Stud Trial - Sensys Networks
Sensys Stud Trial - Sensys Networks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Sensys</strong> <strong>Stud</strong> <strong>Trial</strong><br />
2 sites of 8 Lanes Spread Over 2 Carriageways<br />
In this instance 2 sites which are 500m apart will be considered. An example of where this<br />
would be required is for Traveller Information System. This site would consist of a central<br />
controller with the loop sites 250m away on either side.<br />
Inductive Loop Detector<br />
A the detector is 16 channel, 2 detectors are required to build this solution. It is assumed that<br />
there is sufficient space in an existing communications cabinet to house both loop detectors.<br />
Description Cost Qty Total Note<br />
Install loops 4 lanes $ 5,450.00 4 $ 21,800.00 Detail found in section 5.1<br />
Cut NB tails across<br />
carridgeway $ 522.00 2 $ 1,044.00<br />
Hardware Supply $ 10,478.13 2 $ 20,956.26 Detail found in section 5.3<br />
Install Hardware in Existing<br />
Cabinet $ 87.00 6 $ 522.00 2 techs 3 hours<br />
Install tody $ 127.00 4 $ 508.00 1 in centre island, 1 by cabinet<br />
Trench from toby to cabinet $ 58.00 500 $ 29,000.00 Assume cabinet 10m from toby<br />
Cable from toby to cabinet $ 28.00 510 $ 14,280.00 Extra 5m for slack each end<br />
Connect and test $ 87.00 12 $ 1,044.00 2 techs 6 hours<br />
$ 89,154.26<br />
<strong>Sensys</strong> Detector<br />
It is assumed that there are lighting columns available for the repeaters and acess point to be<br />
connected to.<br />
Description Cost Qty Total Note<br />
Install studs 4 lanes $ 9,933.36 4 $ 39,733.44 Detail found in section 5.1<br />
Hardware Supply $ 10,478.13 1 $ 10,478.13 Detail found in section 5.3<br />
Additional Repeaters $ 3,085.60 3 $ 10,478.13 3 additional repeaters required<br />
Fixings for Repeaters $ 371.20 3 $ 10,478.13 3 additional repeaters required<br />
Install Accesspoint and Cable $ 87.00 4 $ 348.00 2 techs 2 hours<br />
Semistatic to install Access<br />
Point $ 300.00 2 $ 600.00<br />
Install Repeater $ 87.00 8 $ 696.00 2 techs 4 hours<br />
Semistatic to install repeater $ 300.00 4 $ 1,200.00 4 Repeaters<br />
Trench from pole to cabinet $ 58.00 10 $ 580.00 Assume cabinet 10m from toby<br />
Connect and test $ 87.00 8 $ 696.00 2 techs 4 hours<br />
$ 75,287.83<br />
Summary<br />
In a situation of multiple sites in close proximity there is a significant advantage in using <strong>Sensys</strong><br />
as it is a wireless technology. It should also be noted that for the inductive loops it has been<br />
assumed that trenching along the road is possible, this may not be possible in all locations.<br />
Commercial in Confidence Page 29
Change language