Sensys Stud Trial - Sensys Networks
Sensys Stud Trial - Sensys Networks
Sensys Stud Trial - Sensys Networks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Sensys</strong> <strong>Stud</strong> <strong>Trial</strong><br />
5. The sensor will was placed flat in the centre of the hole with the arrow pointing in the<br />
direction of traffic.<br />
6. The holes were then filled with epoxy up to a level 20mm above the sensor.<br />
7. The filler material ‘EZ Street Cold Asphalt’ was then used to fill the remainder of the<br />
hole which was then compacted to road level.<br />
8. The closure was then removed. The whole operation for four studs in 2 lanes took<br />
less than 1 hour. Another semi-static closure was then installed in the 3 rd lane to<br />
install the remaining studs.<br />
Commercial in Confidence Page 15
Change language