Untitled

More documents

Recommendations

Info

AUTO GROOVE REPEAT BUTTONS The two columns of three buttons on the right of the BFD interface are used for auto-accompaniment purposes. Each column represents one of the Groove Banks: the column on the left represents Bank A, while the one on the right represents Bank B. Auto Groove Repeat When this option is checked, any triggered Groove will repeat until it is stopped by a note-off (or by another note-on if in Latching Mode). You can toggle this option via MIDI: Auto Groove Repeat A ON/OFF: F4 or F6*, note no. 101 Auto Groove Repeat B ON/OFF: F#4 or F#6*, note no. 102 Auto Bundle Shuffle When in Auto Groove Repeat mode, this option causes random Grooves within the same Bank to play, instead of the triggered Groove being repeated. This option has no effect when Auto Groove Repeat is disabled. You can toggle this option via MIDI: Auto Bundle Shuffle A ON/OFF: G4 or G6*, note no. 103 Auto Bundle Shuffle B ON/OFF: G#4 or G#6*, note no. 104 Auto Fill When in Auto Groove Repeat mode, enabling this option causes a random Fill from the Fill Bank to be played every n bars, where n is defined by the Auto Fill Period option in the Play Options panel. You can toggle this option via MIDI: Auto Fill A ON/OFF: A4 or A6*, note no. 105 Auto Fill B ON/OFF: A#4 or A#6*, note no. 106 * depends on the state of the -2 Octave Numbering option in the Options panel. A-B Link Also located in the Auto Groove Repeat area is the A-B Link function. When this is activated, any Groove note which is routed to Bank A 51
will be also routed to Bank B, and vice versa. It is useful when using the Note Filters in the Groove Librarian - you can use mutually exclusive Kit-Pieces in each Bank, then use one note to trigger a Groove from each Bank, making new Groove styles quickly and easily. 52
Page 2 and 3: CONTENTS INTRODUCTION 3 Credits 3 W
Page 4 and 5: INTRODUCTION Thank you for choosing
Page 6 and 7: AKG 451 and Shure SM57. They were r
Page 8 and 9: composers who require ‘ready-roll
Page 10 and 11: INSTALLATION AND GETTING STARTED Sy
Page 12 and 13: USING BFD IN YOUR SEQUENCER OR HOST
Page 14 and 15: At this time, Digital Performer doe
Page 16 and 17: • Insert BFD as a DXi plugin. To
Page 18 and 19: In order to make sure all Kit-Piece
Page 20 and 21: • note: If you save your kit file
Page 22 and 23: The finer points of mixing… BFD a
Page 24 and 25: Part Three: INTRODUCING THE GROOVE
Page 26 and 27: Different ways of playing Grooves
Page 28 and 29: with a wide array of working method
Page 30 and 31: When the graph looks like the one s
Page 32 and 33: outed individually into the host’
Page 34 and 35: Kit Selector panel Clicking on this
Page 36 and 37: • Cymbals Each Cymbal Kit-Piece h
Page 38 and 39: MIXER SECTION A note on the control
Page 40 and 41: BFD Stereo or BFD Groups, and are g
Page 42 and 43: GROOVE LIBRARIAN To open the Groove
Page 44 and 45: Auditioning Grooves Grooves or Fill
Page 46 and 47: HUMANIZATION FUNCTIONS • QUANTIZA
Page 48 and 49: when hitting the drums. This panel
Page 50 and 51: • Next Bar: This mode works in a
Page 54 and 55: OPTIONS PANEL This icon activates t
Page 56 and 57: hard disk. Specifying a lower numbe
Page 58 and 59: use a variable hihat controller to
Page 60 and 61: LOADING AND SAVING PRESETS BFD has
Page 62 and 63: MISCELLANEOUS FUNCTIONS Bounce Swit
Page 64 and 65: DRUM RECORDING NOTES BFD’s high-q
Page 66 and 67: BFD’s LIBRARY OF GROOVES Most of
Page 68 and 69: • There is a noticeable delay bet
Page 70: w w w . f x p a n s i o n . c o m

Untitled

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?