You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• If you want to access the various multiple outputs if you load a multi-channel<br />
version of the plugin, create some Aux objects if you have not done so already,<br />
and assign BFD to them by click-holding on their input slots and choosing<br />
Instrument n, where n is the number of the Instrument object on which you<br />
inserted BFD, and selecting the required output. The output configuration in<br />
BFD All is different in Logic, because it has a limitation of 16 VST/AudioUnit<br />
outputs. To get around this limitation (BFD All has 17 outputs), BFD outputs<br />
Cymbals 2 and 3 on the same direct output channel. The BFD All plugin<br />
automatically detects if Logic is the host, and adjusts the output configuration<br />
accordingly.<br />
• If an Aux channel has not been opened and assigned for a particular output,<br />
that output is routed automatically to the master instrument output. Therefore,<br />
if you have not opened an Aux channel and assigned it to the PZM bus output,<br />
for example, it will still be played through the instrument channel for BFD,<br />
assuming the PZM fader is not turned all the way down.<br />
Using BFD in Digidesign Pro Tools<br />
As long as the installation went smoothly, you should now have a new RTAS plugin<br />
available to you: BFD Stereo. At this time, Pro Tools does not support multiple<br />
outputs from instrument plugins. The term ‘multi-channel plugins’ in Pro Tools<br />
refers to stereo-output plugins. If you need to use multiple output versions of BFD,<br />
please see the section below entitled “Using BFD with ReWire”.<br />
To use BFD, please do the following after launching Pro Tools:<br />
• Add a new Audio Track or Aux channel using the File/New Track menu item.<br />
• Create a new MIDI track.<br />
• On the mixer view, click an insert button on the Audio channel you just inserted,<br />
and select BFD (Stereo) from the multi-channel RTAS plug-in/Other menu<br />
item.<br />
• The MIDI track you created will also appear on the mixer: select BFD as the<br />
output port for this track.<br />
Using BFD in MOTU Digital Performer 4<br />
As long as the installation went smoothly, you should now have three new Audio-<br />
Unit plugins available to you: BFD Stereo, BFD Groups, and BFD All (in fact, in<br />
DP4, there will be six plugins - since there is a stereo and mono version for each).<br />
12