10 - Biological specimen preparation - Agar Scientific

Biological specimen preparation
Grid coating pen
Pen designed to apply a thin layer of adhesive to grids with minimal pressure. The adhesive will
dry, ready for tissue mounting, in 1 to 2 minutes. It can also be used for pre-treating grids before
working with Formvar ® or other thin films.
G3538
Grid coating pen
Grid staining system
Grid staining system for 25 grids, consisting of numbered grid holder and handle, cover and
staining vessels (two supplied). Plastics are not acid resistant, and staining vessels are designed
for aqueous solutions. Alcohol based stains will damage the vessels.
G3756
G3757
Grid staining system
Replacement staining vessels, 1 red and 1 blue
Microwell staining mould
This blue silicone rubber mould which fits into standard Petri dishes is useful for immunocytochemistry
and post staining. It has 60 wells, 4.8 mm in diameter and 1.8 mm deep, each number and letter
coded for easy identification. Uses small quantities of reagents.
G3758
Microwell staining mould
Teflon ® immunostaining pad
This immunostaining pad made from Teflon is resistant to most chemicals and easy to clean. It
has 40 concave recesses, 4.5 mm in diameter and 1.5 mm deep, useful for small specimens or
valuable chemicals. Suitable for microwave use.
Dimensions: 42 x 70 x 6.3 mm.
G3765
Immunostaining pad, Teflon
MENCO grid staining pad
PTFE staining pad, 89 mm diameter, which fits inside a large glass Petri dish.
Evaporation can be reduced by covering Petri dishes with parafilm.
G3796
MENCO immunostaining pad
Tel: +44 (0)1279 813519 Fax: +44 (0)1279 815106 Email: sales@agarscientific.com www.agarscientific.com 242