AlphaCom E - Zenitel

Revised May 2009
b. The flashing green LED illuminates "solid" on the appropriate button if direct dial unit (D48) is
used.
c. The Number and Text of the station that is connected appears in the LCD.
d. An in-use LED illuminates on the calling substation.
e. Clear, two-way communication shall take place.
f. Other calls from substations to the CRM station shall each flash their appropriate direct access
button LED if direct dial unit (D48) is used and sound the call-in tone.
C. CALL FROM A CRM STATION TO ANY OTHER STATION. A call shall be placed from a CRMIV
station to any other station in the system by simply dialing the station number on the digit keypad.
LCD on the CRMIV station shall indicate the number and text of the called station. When calling any
other master station, “duplex” hands-free communication shall be possible between the two stations.
When calling an elevator car, or other security substation, the press-to-talk button shall be used to
control the conversation, if needed.
D. GROUP CALL FROM A CRM STATION. A group call shall be initiated at a CRMIV by dialing the
number assigned to preprogrammed group of stations. This shall sound an alert tone and allow
paging to all stations in the group. There shall be no limitation to the quantity of stations in a group.
Group calls shall have priority over other conversations in progress.
E. PROGRAMMING BUTTONS ON THE CRM STATION. Direct access buttons on the CRMIV master
station shall be easily programmed and changed by the station user. Once programmed, the button
assignments shall remain in memory. This feature is valid if CRMIV is equipped with D48 button
modules.
(Note to specifier: Describe other desired operations)
STENTOFON/Zenitel Group - 6119 Connecticut Ave. – Kansas City, MO 64120 – 816/231-7200 – 800/654-3140 – Fax: 816/231-7203 – www.zenitelusa.com
- 10 -