Syntron® Vibrators - FMC Technologies

Electromagnetic Vibrators
Syntron ® Electromagnetic Vibrator Controls
Syntron ® Electromagnetic Vibrators are normally
furnished with controls. Control units include an
operating switch, fuse and adjustable control to
vary vibration force. Models V-9 through V-181
(except model V-41) can be furnished with selfcontained
rectifiers if force adjustments are not
required. (Unless a self-contained vibrator is specified,
a control is required for operation of Models V-9
through V-500.) Control units are available for
multiple vibrator applications. Control enclosures
can also be furnished to meet special electrical
standards. In addition to the standard controls listed
below, FMC Technologies can provide control systems
built to meet your requirements.
Intermittent DC Signal Potentiometer Voltage Solid Soft
Control Model Volts Amps Enclosure Contacts Input Type AC RC Regulation State Start
Power Pulse AC 115 5 Nema 1 ● Manual ● ●
CTRC-1-C 230 5 Nema 1 ● Manual ● ●
Power Pulse WT 115
230 5
Nema 4 ● Manual ● ●
115 12
C-2 230 6 Dust-tight Manual ●
460 3
115 20
C-3 230 10 Dust-tight Manual ●
460 4.5
115 28
C-4 230 18 Dust-tight Manual ●
460 9
C-42 460 7.5 Dust-tight Manual ●
C-5
230
460
40
20
Dust-tight Manual ●
115 60
CRSDC-2 230 45 Nema 4 ● ● Min / Max ● ● ●
460 25
Conductor Series*
Conductor 15 115 15 Nema 4 ● Max / Manual ● ● ● ●
Conductor DC 15 115 15 Nema 4 ● ● Max / Manual ● ● ● ● ●
Conductor 28 230 8 Nema 4 ● Max / Manual ● ● ● ●
Conductor DC 28 230 8 Nema 4 ● ● Max / Manual ● ● ● ● ●
Conductor 118 115 18/20 Nema 12 ● Max / Manual ● ● ● ● ●
Conductor 218 230 18/20 Nema 12 ● Max / Manual ● ● ● ● ●
Conductor DC 118 115 18/20 Nema 12 ● ● Max / Manual ● ● ● ● ●
Conductor DC 218 230 18/20 Nema 12 ● ● Max / Manual ● ● ● ● ●
* Conductor controls are also available in open chassis models for ease
in mounting in your system controls.
Note: Some open chassis models have reduced amperage capability.
Contact FMC Technologies for details.
● Standard in the model listed
Note: Different power voltages available. Contact FMC
Technologies for more information.
10