You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Roto Brushing Wax<br />
When you have many skis to do Roto brushing can be timesaving.<br />
You will need a drill that can do a minimum of 1000rpm and ideally up<br />
to 2000rpm or more. It is recommended to use protection eyewear.<br />
ROTO BRUSHING CERA NOVA WAXES<br />
After Scraping:<br />
SWIX SPORT TECH MANUAL 55<br />
Roto Brushing<br />
1.<br />
Use the Steel Brush T179 from tip to tail in one<br />
movement. Two repetitions.<br />
2.<br />
Use the T16M Horsehair Initial Roto Brush with<br />
a speed of 1000rpm to 2000rpm. Use light<br />
pressure. Start from the tip. Wax particles<br />
should be thrown towards the tail. Move the<br />
drill back and forth approx. a foot at the time<br />
as you gradually work your way towards the<br />
tail.<br />
3.<br />
Continue to use the T16M Horsehair Roto<br />
Brush (1000rpm/2000rpm) from tip to tail two<br />
more times in one continuous pass of three to<br />
five seconds.<br />
www.swixschool.com
Change language