You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
46 SWIX SPORT TECH MANUAL<br />
Cera F Application<br />
CERA F POWDER ROTO CORK APPLICATION<br />
The initial steps before Cera F Roto Corking are the same as for the ironing<br />
in method of Cera F.<br />
It is recommended to have one separate Roto Cork (T18C) for each<br />
different Cera F. Roto corks can be cleaned by setting in drill at high speed<br />
and then apply Bronze Hand-Brush (T162) towards the cork.<br />
Cera F applied with Roto Cork is sometimes applied on top of ironed and<br />
brushed Cera F as a “topping”.<br />
www.swixschool.com<br />
1.<br />
Apply Cera F evenly.<br />
2.<br />
Use a <strong>wax</strong>ing iron to fix the Cera F powder to<br />
the base. Iron temperature to be around<br />
150°C to 155°C (300°F to 310°F). Iron quickly,<br />
3 to 4 seconds for one ski or board.<br />
3.<br />
Use the Roto Cork (T18C) at a speed of<br />
approx. 1.500 RPM. Start from the tip and<br />
work the Cera F powder into the base by moving<br />
the drill back and forth approx. a foot at a<br />
time as you work your way towards the tail.<br />
Use light pressure. Let the skis/snowboard<br />
rest for 5 minutes at room temperature.
Change language