Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
44 SWIX SPORT TECH MANUAL<br />
Cera F Application<br />
IRONING APPLICATION OF CERA F POWDER<br />
A standard package of 30 grams normally is enough to <strong>wax</strong> 2 to 3 pairs of Downhill skis.<br />
A sufficient layer of powder has to be applied. If the layer is too thin, the high temperature<br />
of the iron might destroy the base.<br />
Before the application of Cera F, the skis have to be <strong>wax</strong>ed with the actual,<br />
traditional <strong>wax</strong> for today’s conditions.<br />
www.swixschool.com<br />
1.<br />
Distribute the Cera F powder evenly on<br />
the base. Don’t forget to apply enough<br />
powder to protect the base from direct contact<br />
with the iron. Lightly touch the iron along the<br />
base to stick the powder to the base.<br />
2.<br />
Iron the powder into the base. Make just one<br />
pass with the iron, taking approx. 5 to 6 seconds.<br />
Recommended iron temperature setting<br />
for FC7 is 155°C (310°F), and for FC78 it is<br />
165°C (330°F).<br />
For FC8 and FC10 the temperature setting<br />
should be approx. 150°C.<br />
3.<br />
After cooling to room temperature (5 min.)<br />
brush the powder up from the base with the<br />
stiff Black Nylon Brush (T194/T199).<br />
10 strokes.