wax chart - Reliable Racing

The best drill choice for roto-brushing is
one with a power cord rather than batteries.
These drills retain a more constant speed,
have higher revolution per minute capacity,
and variable speed options. RPMs from about
1000 to 2000 are used for brushing.
T16M Horsehair
The best all round brush. The initial brush on
all waxes. Used on regular waxes and Cera F.
(Do not use the same brush on regular wax and
Cera F.) 100 mm wide.
T17B Black Stiff Nylon
Special brush for hard cold waxes. Can also be
the first brush on Cera F. 100 mm wide.
T17W White or Blue Nylon
Polish brush for wax and Cera F. Also preferred
by some as “all round” brush. 100 mm wide.
T15HPS
Handle with140 mm driveshaft and 100 mm wide
protection cover.
T14HPS
Handle with 100 mm driveshaft and protection
cover.
T18C Cork
High quality cork for Cera F application of
powders, liquids and solids. 100 mm wide.
T19S Steel
Fine steel brush to clean base structures before
waxing. Can be used as second brush on wax
after T16M Horsehair brush.
T16M
T17B
T17W
T14HPS
T14SS - 100 mm
T14SM - 140 mm
T14SL - 200 mm
SWIX SPORT TECH MANUAL 15
Base Preparation
NOTE!
• Always use safety glasses when rotobrushing.
• Use the Protective Cover (T12PS) to avoid
getting wax particles and powder in the
face.
• Don’t press too hard, let the brush do
the work!
• Brush from tip to tail with the brush rotation
throwing the wax particles towards
the tail.
T14HN
T18C
T19S
www.swixschool.com